TF 4TH PARTY

  • WishList
4th party Masterpiece KO MP52 / MP52+/ MP52+SW MP-52 / MP-52+/ MP-52+SW (Starscream / Thundercracker / Skywarp) 25cm / 10"
$24.99

Features:  Note: The TW01 Throne / cape set is sold seperately and not included in any of the figures.  The below are pros and cons of this 1:1 KO  based on the feedback from our domestic customers in China: Pros:  - No simplification in structure and transformation. 1:1 direct KO.  - All accessories (replacement parts, special effect parts, stand platforms.) are included. - Dimensional deviations on the parts have been optimized, transformation is as smooth as that of the original version. Cons - Still some seams can be found after transformation and hard to adjust on the plane mode; - Materials used are not as good as the original version   Status: 2024-5 New batch in stock.   Parameters: Producer 4th party KO Size Robot Form Approx. 25cm (10 Inches) Tall Material ABS Plastic + Diecast Shipment From China Note KO Version   
  • WishList
4th Party No Brand Masterpiece MP51 MP-51 Arcee
$54.99

Features:  This is the direct copy of MP51 Arcee with no modification / simplification.  The product comes with the same colorful box as MP51   Status: 2024-5 In stock.   Parameters: Producer No Brand Size 1:1 MP51 Material ABS Plastic + Diecast Shipment From China Note KO Version   
  • WishList
4th Party No Brand Yuexing Oversized XP-13 XP13 KO MPM03 Bumblebee / XP-14 XP14 KO MPM04 Optimus Prime
$44.99

Features:  XP13: Oversized KO MPM03 BBB 22cm / 8.7" XP14: Oversized KO MPM04 OP 30cm / 11.8" With die-cast parts added and several accessories. No simplification on transformation.   Status: 2023-8 New batch in stock.    Parameters: Producer N/A Size See product details Material ABS Plastic + Diecast Shipment From China Note Oversized KO Version  
  • WishList
Sale
4th Party No Brand KO MP56 MP-56 Trailbreaker 18cm / 7"
$59.99 $64.99

Features:  This is a 1:1 KO version of the MP56 Trailbreaker from the official line, with some upgrade as below:  - Die-cast parts are added: Engine cover, rear mirror, hips, shins, feet and etc. - A new changeable head is added.   Status: 2023-6 New batch in stock.    Parameters: Producer N/A Size Same as official MP56 Material ABS Plastic + Diecast Shipment From China Note 1:1 KO Version  
Sale
4th Party No Brand Yuexing Oversized XP-15 XP15 KO MPM05 MPM-05 Barricade 20cm / 7.9"
Sold Out

Features:  This is a oversized KO version of the MPM05 Barricade from the official line, with no modification.   Status: 2023-6 New batch in stock.    Parameters: Producer N/A Size Same as official MPM05 Barricade Material ABS Plastic + Diecast Shipment From China Note Oversized KO Version  
Sale
4th Party CR01S CR-01S Oversized KO PE DX06 Beast Gorira General Gorilla (Not Optimal Optimus) Black Version 25cm / 9.9"
Sold Out

Features:  *Note: This is the black version This CR01S is oversized KO version of PE DX06 Gorira (Not Optimal Optimus), with the current size fitting to JIANGXING Red dragon.    Status:  2023-5 1st batch in stock   Parameters: Producer 4th party Size MP Size Material ABS Plastic Shipment From China Note N/A  
  • WishList
Sale
4th party No Brand NB CS-01 CS01 Double-blade Warrior (KO Flame Toys Optimus Primal, Furai Models) 15.5cm / 6"
$42.99 $64.99

Features:  This is a direct-copy of Flame Toys Furai Models Optimus Primal with full set of accessories and extra die-cast parts.   Status: 2023-2 In stock.   Parameters: Producer No Brand Size 15.5cm Material ABS Plastic + Diecast Shipment From China Note KO Version   
  • WishList
Sale
4th party No Brand NB KO NOT Masterpiece MP36 MP-36 Megatron
$84.99 $94.99

Features:  This is a direct-copy of Not Masterpiece MP36 Megatron with full set of accessories.  Note:  1. The light and voice chip on the cannon does't work for this batch  3. Post-sales service can't be guaranteed for Non official / KO products.   Status: 2024-1 New batch in stock.   Parameters: Producer No Brand Size 1:1 MP36 Material ABS Plastic + Diecast Shipment From China Note KO Version   
  • WishList
Sale
4th Party RW-01 RW01 Rhino Warrior Oversized WFC-K27 Rhinox ( with weapon added) 20.5cm / 8"
$34.99 $39.99

Features:  This is an oversized KO version of the Kingdom Rhinox from the official line, with enhanced details on painting / gaps on the chest being filled / new weapons added.    Status: 2023-2 New batch in stock.    Parameters: Producer N/A Size Robot Form Approx. 20.5 cm (8 Inches) Tall Material ABS Plastic + Diecast Shipment From China Note Oversized KO Version  
  • WishList
4th Party Shock Warrior SW-02 SW02 Ironhide Oversized Studio Series SS84 ( Enhanced Details & Painting) 22cm
$39.99

Features:  This is an oversized KO version of the SS84 Ironhide from the latest Bumblebee movie line, with enhanced details on painting.    Status: 2022-10 New batch in stock.    Parameters: Producer N/A Size Robot Form Approx. 19cm (7.5 Inches) Tall Material ABS Plastic + Diecast Shipment From China Note Oversized KO Version  
  • WishList
Sale
Rose Toys No Brand NB RT02 RT-02 Night Rose (NOT Masterpiece MP55 MP-55 Nightbird)
$69.99 $74.99

Features:  RT-02 Night Rose is a transformable female robot Ninja with high articulation. It transforms into a Cybertronian car.    The current batch should with a new face skupt for RT-01 (Not MP51).    Status: 2022-7 In stock.   Parameters: Producer No Brand Size 1:1 KO MP55 Material ABS Plastic + Diecast Shipment From China Note KO Version   
  • WishList
Sale
【Loose Pack】4th party TW01 TW-01 Coronation Accessories for for MP52 MP-52 Starscream
$24.99 $29.99

Features:   *Note: The product would be sent in neutral packing (without the original box) to guarantee the best speed and intactness. 4th party accessories for MP52 Starscream. Suitable to MP52 and all 1:1 KO versions of MP52 in the market (including EG01 series).  The whole set includes: - 1 x Crown - 1 x Cloak - 2 x Shoulder armors (Including 2 x Connecting pieces) - 1 x Throne     Status: 2022-11 New batch in stock.   Parameters: Producer 4th party Size N/A fit to MP52 Material ABS Plastic Shipment From China Note KO Version   
  • WishList
4th Party Shock Warrior SW-01 SW01 Ratchet Oversized Studio Series SS82 ( Enhanced Details & Painting) 22cm
$39.99

Features:  This is an oversized KO version of the SS82 Ratchet from the latest Bumblebee movie line, with enhanced details on painting.    Status: 2022-10 New batch in stock.    Parameters: Producer N/A Size Robot Form Approx. 19cm (7.5 Inches) Tall Material ABS Plastic + Diecast Shipment From China Note KO Version  
Sale
4th Party CR01 CR-01 Oversized KO PE DX06 Beast Gorira General Gorilla (Not Optimal Optimus) 25cm / 9.9"
Sold Out

Features:  This CR01 is oversized KO version of PE DX06 Gorira (Not Optimal Optimus), with the current size fitting to JIANGXING Red dragon.    Status:  2022-7 1st batch in stock   Parameters: Producer 4th party Size MP Size Material ABS Plastic Shipment From China Note N/A  
  • WishList
Sale
4th Party The Beast Alliance TB01 TB02 TB03 Gorilla / Hawk / Pterosaur Oversized(Not Kingdom Optimus Primal / Airazor / Terrorsaur )
$34.99

Features:  Note: This link includes different buy options, pls make sure you choose the right one you want.  These are oversized KO versions with decent quality, more accessories and die-cast parts added, and some modifications. TB-01 Gorilla (18cm / 7“) TB-02 Hawk: (17cm / 6.6") TB-03 Pterosaur: (17cm / 6/6")   Status:  2022-7 In stock.   Parameters: Producer 4th Party No Brand Size MP Size Material ABS Plastic Shipment From China Note KO Beast Wars  
【Incoming】4th Party Masterpiece BW-11 BW11 Mad Panther Warrior (Not MP34 MP-34 Beast War Cheetor)
Sold Out

Features:  This is a 4th party 1:1 KO version of MP34 Cheetor. This robot figure transforms into a mechanic panther.    Status:  2023-7 New batch coming very soon in August. Full payment acceptable   Parameters: Producer 4th Party No Brand Size MP Size Material ABS Plastic Shipment From China Note KO MP34  
Sale
Rose Toys No Brand NB RT01 RT-01 Robot Rose (NOT Masterpiece MP51 MP-51 Arcee)
Sold Out

Features:  RT-01 Robot Rose is a transformable female robot with high articulation. It transforms into a Cybertronian car.    Status: 2022-7 In stock.   Parameters: Producer No Brand Size 1:1 MP51 Material ABS Plastic + Diecast Shipment From China Note KO Version   
  • WishList
Sale
4th Party NB No-Brand Not MP33 MP-33 Inferno & Not MP35 MP-35 Grapple (Non-Official Version)
$55.99 $64.99

Features:  *Note: There're 2 buy options in this page, pls make sure you place the right item you want into the shopping cart.  These 2 No-Brand figures are KO versions of the official MP-33 and MP-35.   Status:  2022-5 New batch in stock.   Parameters: Producer No Brand Size MP Size Material ABS Plastic Shipment From China Note KO Version  
  • WishList
Sale
4th Party No Brand T-11 T11 Oversized MPM11 MPM-11 Ratchet 22cm / 8.7"
$74.99 $84.99

  Features:  *Note Battery Type: 2 x LR521 for headlights 2 x LR41 for the blaster This is an oversized KO version of the MPM11 Ratchet from the official line, with enhanced details on painting.    Status: 2024-5 New batch in stock.    Parameters: Producer N/A Size Robot Form Approx. 22cm (8.7 Inches) Tall Material ABS Plastic + Diecast Shipment From China Note KO Version  
  • WishList
Sale
No Brand NB White Leg Version 4th Party KO MP44 MP-44 OP 3.0 Loose Pack Version (Backpack Modified Version, No box, No manual,No Jetpack) 25cm / 10"
$84.99 $99.99

Features:  *Note: This is the latest version with the backpack modified and white legs. There is no Jetpack with current version This is is a 4th party KO version of MP44 OP 3.0. No formal packing for this set. It is probably manufactured by BMB so good post-sales service can't be expected.  The below are pros and cons of this KO set based on the feedback from our domestic customers in China: Only some accessories are included. Convoy is not included. Pros:  - No simplification in structure and transformation. 1:1 full version KO.  - No major or common defects are found in bulk. - Joints on knees and ankles are enhanced.  - Light effect added to the jet pack.    Cons - Plastic material used are not as good as the official version.  - Still the hip joints are loose on some sets (same to official version) - On some figures, Some...
Sale
Eagle EG01N EG-01N Not MP52+ MP-52+ (Skywarp Upgraded Version ) 25cm / 10"
Sold Out

Features:  Note: 1. There's no spare part available for this figure.  2. This is is a 1:1  KO version of MP52+ (in homage to MP2.0 Skywarp) with some improvement. The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China: Pros:  - No simplification in structure and transformation. 1:1 full version KO.  - Some easily crackable parts of the original figure are changed to nylon ones - All accessories (replacement parts, special effect parts, stand platforms.) are included. - Painting are similar to the original figure Cons - Still some seams can be found and hard to adjust on the plane mode; - Details on the head sculpts are not as good as the original one.  - Some joints are too tight to transform. Status: 2022-3 New batch in stock.   Parameters: Producer Eagle Size Robot Form Approx. 25cm (10 Inches) Tall Material ABS Plastic + Diecast...
Sale
Eagle EG01J EG-01J Not MP52+ MP-52+ (Upgraded Version Thundercracker) 25cm / 10"
Sold Out

Features:  Note: 1. Currently there's no spare parts available for this figure. 2. This is is a 1:1  KO version of MP52+ (in homage to MP2.0 Thundercracker) with some improvement. The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China: Pros:  - No simplification in structure and transformation. 1:1 full version KO.  - Some easily crackable parts of the original figure are changed to nylon ones - All accessories (replacement parts, special effect parts, stand platforms.) are included. - Painting are similar to the original figure Cons - Still some seams can be found and hard to adjust on the plane mode; - Details on the head sculpts are not as good as the original one.  - Some joints are too tight to transform. Status: 2022-2 New batch in stock.   Parameters: Producer Eagle Size Robot Form Approx. 25cm (10 Inches) Tall Material ABS Plastic +...
Eagle EG01 EG-01 Not MP52 MP-52 (Upgraded Version Starscream) 25cm / 10"
Sold Out

Features:  Note: No Post-sale service (spare part) is available for this figure.  The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China: Pros:  - No simplification in structure and transformation. 1:1 full version KO.  - Some easily crackable parts of the original figure are changed to nylon ones - All accessories (replacement parts, special effect parts, stand platforms.) are included. - Painting are similar to the original figure Cons - Still some seams can be found and hard to adjust on the plane mode; - Details on the head sculpts are not as good as the original one.  - Some joints are too tight to transform. Status: 2022-2 New batch in stock.   Parameters: Producer Eagle Size Robot Form Approx. 25cm (10 Inches) Tall Material ABS Plastic + Diecast Shipment From China Note KO Version   
Sale
No Brand NB 4th Party KO MP49 MP-49 Black Convoy (Nemesis Prime) Neutral Packing Version 25cm / 10"
Sold Out

Features:  This is is a 4th party KO version of MP49 Black Convoy (Black OP 3.0) No formal packing for this set. It is probably manufactured by BMB so good post-sales service can't be expected.  The below are pros and cons of this KO set based on the feedback from our domestic customers in China: Only some accessories are included. Convoy is not included. Pros:  - No simplification in structure and transformation. 1:1 full version KO.  - No major or common defects are found in bulk. - Joints on knees and ankles are enhanced.  - Light effect added to the jet pack.    Cons - Plastic material used are not as good as the official version.  - Still the hip joints are loose on some sets (same to official version) - On some figures, Some parts don't fit precisely,seams can be found on robot mode.  (like inner parts of the...
  • WishList
Sale
4th Party NB No-Brand Not MP20 MP-20 Wheeljack & Not MP23 MP-23 Exhaust (Non-Official Version)
$32.99

Features:  *Note: This product link contains different buy options. Pls make sure you choose the right one you want.  These 2 No-Brand figures are KO versions of the official MP-20 and MP-23. According to all the reviews by our domestic customers, the pros and cons of this KO figure is as below: Pros:  No simplification on all the transformation process.  Almost no large seams in the vehicle mode (better than most of the KO figures.)   Cons:  Painting is a little bit thin. The knee joints of some figures may be a little bit loose.The wheels of some figures may not rotate smoothly.   Status:  2021-11 New batch in stock.   Parameters: Producer No Brand Size MP Size Material ABS Plastic Shipment From China Note KO Version  
Sale
4th Party No Brand KO MPM05 MPM-05 Barricade
Sold Out

Features:  This is a 1:1 KO version of the MPM05 Barricade from the official line, with no modification. *Note: Except for major defects, post-sale service of KO products can't be guranteed by us.    Status: 2022-5 New batch in stock.    Parameters: Producer N/A Size Same as official MPM05 Barricade Material ABS Plastic + Diecast Shipment From China Note KO Version  
Sale
No Brand 4th Party JH01 JH-01 KO MPM11 MPM-11 Ratchet Green Version ( Enhanced Details & Painting) 19cm / 7.5"
Sold Out

在Features:  Note: This is the green color version. You can find the original color version in the below link:  NO BRAND JH01 JH-01 KO MPM11 MPM-11 RATCHET This is a 1:1 KO version of the MPM11 Ratchet from the official line, with enhanced details on painting.   *Note: Except for major defects, post-sale service of KO products can't be guranteed by us.    Status: 2021-5 New batch in stock.    Parameters: Producer N/A Size Robot Form Approx. 19cm (7.5 Inches) Tall Material ABS Plastic + Diecast Shipment From China Note KO Version  
4th party NB No-Brand MP17 MP-17 Police Car (Not Prowl)
Sold Out

Features:  This No-Brand figure is an KO version of the official MP-17. According to all the reviews by our domestic customers, the pros and cons of this KO figure is as below: Pros:  No simplification on all the transformation process. Good texture of the plastic used. Decent painting.  Cons: There's some small deviation of the part and seams can be found.  In some batches some joints are loose (like the joint for the shoulder cannon. )   Status 2022-9 New batch In stock.   Parameters: Producer No Brand Size Robot Form Approx. 19cm (7.5 Inches) Tall Material ABS Plastic Shipment From China Note KO Version  
  • WishList
Sale
No Brand 4th Party MP28 MP-28 HR Red Race Car (Not Hot Rod) 19cm / 7.5"
$31.99 $39.99

Features:  This is a KO version of MP-28 from official line. Product photo is real shot. Generally the quality of this KO is decent (painting, joints).  Pros: No simplification on all the transformation process. Almost no large seams in the vehicle mode (better than most of the KO figures.)Relativel good painting. Cons: Plastic used is not as good as the official version.In some batches the joints on the legs are loose.     Status:  2021-9 New batch in stock.   Parameters: Producer Takara Tommy Size Robot Form Approx. 19cm (7.5 Inches) Tall Material ABS Plastic Shipment From China Note Factory-released version, Not KO.  
Sale
4th Party Masterpiece KO BW-10 BW10 MP50(Beast War Tigatron)18cm / 7"
Sold Out

Features:  This is a 4th party 1:1 KO version of MP50 Tigatron. This robot figure transforms into a white mechanic tiger. Current batch includes the BW Megatron head sculpt.    Status:  2023-9 Reissue batch In stock.    Parameters: Producer Toys Mage Size Robot Form Approx. 18cm (7 Inches) Tall Material ABS Plastic Shipment From China Note KO MP50  
Sale
4th Party KO MP32 MP-32 General Gorilla (Optimus Primal)
Sold Out

Features:  1:1 KO version of MP32. All product photos are for this KO version.  Pros: (1) Good quality plastic are used for the main body. (2) Most Ratchet joints work well. (3) Quality of Painting are similar to original version (with a deeper color tone.) Cons:(1)For random batches joint of the left leg is loose.(2)For random batches joints for the backpack and hips are tight (lubricant is needed), or the plastic around the joint might crack.(3)On certain parts tiny color difference can be observed (backs of the hands, bellys of the gorilla mode)(4)Burrs (caused by the injection molding) appears on the edges of some parts (changeable faces, back pack and etc.)   Note: (1)*No coin. (2) Except for major defects, no post-sales service can be guaranteed. Customers who buy this figure are considered that they accept the pros and cons listed as above.   Video Review by 양말TV SocksTV: Status:  2021-8 New batch in stock  ...
4th Party KO MP29 MP-29 Shockwave 19cm / 7.5"
Sold Out

Features:  Note: (1)*No coin. (2) Except for major defects, no post-sales service can be offered. Customers who buy this figure are considered that they accept the pros and cons listed as below.   KO version of MP29.  Pros: (1) Good quality plastic are used for the main body. (2) Ratchet joints work well.  Cons:(1)For random batches some joints of the lower body are loose.(2)For random batches the trace of the plastic injection gate are obvious on the body of the figure. (3)For random batches some lights may not lit up,this is a common defect for this version and cant be solved by post-sale service.   Status:  2022-3 New batch in stock   Parameters: Producer Takara Tommy Size Robot Form Approx. 19cm (7.5 Inches) Tall Material ABS Plastic Shipment From China Note N/A  
  • WishList
Sale
4th Party NB No-Brand MP39 MP-39 Sunstreaker (Non-Official Version)
$54.99 $64.99

Features:  This No-Brand figure is an KO version of the official MP-39. According to all the reviews by our domestic customers, the pros and cons of this KO figure is as below: Pros:  No simplification on all the transformation process.  The disguise mode is moveable with its tyres  Almost no large seams in the vehicle mode (better than most of the KO figures.)   Cons:  Plastic used is not as good as the official version. Some parts are not well-polished. Painting is too thin (Peeling occurs occasionally during the tranformation.)   Status 2022-6 New batch in stock.    Parameters: Producer No Brand Size Robot Form Approx. 19cm (7.5 Inches) Tall Material ABS Plastic Shipment From China Note KO Version  
Sale
4th Party No Brand KO MPM10 MPM-10 F12AS Starscream Cybertronian Painting 28cm / 11"
Sold Out

Features:  Note: This is the Cybertronian painting version (some of the product photo listed is for the ordinary version with the buying link as below) Regular version can be found here: Regular version KO MPM10 This is a 1:1 KO version of the MPM10 Starscream from the official line, with modification as below: - Deep metallic painting is applied (closer to the image in Bayverse movie) - Back hip parts of the robot mode is modified - The feet part is also modified.  *Note: Except for major defects, post-sale service of KO products can't be guranteed by us.    Status: 2021-6 In stock.    Parameters: Producer N/A Size Robot Form Approx. 28cm (11 Inches) Tall Material ABS Plastic + Diecast Shipment From China Note KO Version  
4th Party No Brand KO MPM10 MPM-10 F01 Starscream 28cm / 11"
Sold Out

Features:  This is a 1:1 KO version of the MPM10 Starscream from the official line, with modification as below: - Deep metallic painting is applied (closer to the image in Bayverse movie) - Back hip parts of the robot mode is modified - The feet part is also modified.  *Note: Except for major defects, post-sale service of KO products can't be guranteed by us.    Status: 2021-6 New batch in stock.    Parameters: Producer N/A Size Robot Form Approx. 28cm (11 Inches) Tall Material ABS Plastic + Diecast Shipment From China Note KO Version  
Sale
4th Party No Brand JH01 JH-01 KO MPM11 MPM-11 Ratchet ( Enhanced Details & Painting) 19cm / 7.5"
Sold Out

Features:  This is a 1:1 KO version of the MPM11 Ratchet from the official line, with enhanced details on painting.    *Note: Except for major defects, post-sale service of KO products can't be guranteed by us.    Status: 2022-12 New batch in stock.    Parameters: Producer N/A Size Robot Form Approx. 19cm (7.5 Inches) Tall Material ABS Plastic + Diecast Shipment From China Note KO Version  
4th Party No Brand KO Oversized BS01 BS-01 (AAT STF01 STF-01 Firage, Dino) 19cm / 7.5"
Sold Out

Features:  This is an oversized KO version of the STF01 Dino by AAT, the producer should be BMB Black Mamba   Status: 2023-1 New batch in stock.    Parameters: Producer BMB Size Robot Form Approx. 19cm (7.5 Inches) Tall Material ABS Plastic + Diecast Shipment From China Note KO oversized version  
Sale
No Brand NB Silver Leg Version 4th Party KO MP44 MP-44 OP 3.0 Loose Pack Version (No box, No manual) 25cm / 10"
Sold Out

Features:  *Note: Now we have the 3rd batch in stock which is with its hips painted in silver, that's why we call it "Silver Legs Version" This is is a 4th party KO version of MP44 OP 3.0. No formal packing for this set. It is probably manufactured by BMB so good post-sales service can't be expected.  The below are pros and cons of this KO set based on the feedback from our domestic customers in China: Only some accessories are included. Convoy is not included. Pros:  - No simplification in structure and transformation. 1:1 full version KO.  - No major or common defects are found in bulk. - Joints on knees and ankles are enhanced.  - Light effect added to the jet pack.    Cons - Plastic material used are not as good as the official version.  - Still the hip joints are loose on some sets (same to...
  • WishList
Sale
Toysmage TM01 T-Rex KO MP43(Beast War Megatron)25cm / 10"
$94.99 $109.99

Features:  Note: All LED parts are cancelled for the current batch.  This Toymage TM01 T-Rex is an improved version of the official MP43 Megatron, featuring: - Some loose and easily breakable parts on the original version like waist joints and some snaps on the body have been strengthened.  - Voice chips changes from Japanese to Chinese and English (According to the current feedback, there's possibility for some voice chips to be born defected. Currently TM can't offer replacement ) - The painting and details are done generally similar to the original official version.  - Transparent parts has been re-made.    Status:  2023-12 Reissue version coming very soon in 1-2 weeks.   Parameters: Producer Toys Mage Size Robot Form Approx. 25cm (10 Inches) Tall Material ABS Plastic Shipment From China Note Improved KO version of MP43  
Sale
Transformers Power of the Primes POTP Predaking 5 in 1 set 【Unofficially Released Version】
Sold Out

Features:  This POTP Predaking 5 in 1 set (Titan Class combiner) is a genuine version released unofficially from Viet Nam (Hasbro factory), it is not an official version in any market but it is also not KO. We got a few stock with the most favorable price.    Status: 2021-1 A few set in stock.   Parameters: Producer Official  Size Same size as official version.  Material ABS Plastic Shipment From China Note N/A  
Transformers Generations War for Cybertron WFC-E22 Earthrise Voyager Quintesson Judge
Sold Out

Features:  This WFC Earthrise (Voyager Class) is an official version in Chinese market, not KO. We got a few sets in stock.   Status: 2020-10 A few sets in stock.    Parameters: Producer Official  Size N/A Material ABS Plastic Shipment From China Note N/A  
Sale
4th Party Takara Tomy MP31 MP-31 Delta Magnus
Sold Out

Features:  This is a KO version of MP-31 Delta Magnus. Product photo is real shot. Generally the quality of this KO is decent (painting, joints) according to the feedback from our domestic customers. The main defect is that the quality of the plastic is still not as good comparing to the original MP31 version.  *Note: Except for major defects, post-sale service of KO products can't be guranteed by us.    Status: 2020-8 A few sets in stock.   Parameters: Producer N/A Size Robot Form Approx. 19cm (7.5 Inches) Tall Material ABS Plastic Shipment From China Note KO Version  
Sale
Takara Tomy Bayverse TLK-EX Optimus Prime Clear Version Japan 7-11 Limited Version
Sold Out

Features:  TLK Optimus Prime Clear version exclusively released for 7-11 chain store in Japan. We had a few sets with favorable price. It is made from unique transparent plastic and transforms into a truck.  *Note: there're two versions, with or without facemasks. We would send randomly.   Status: 2020-5 A few sets in stock.   Parameters: Producer Takara Tomy Size Unknown Material ABS Plastic Shipment From China Note Exclusive version for 7-11 Japan.  
4th Party Takara Tomy MP40 MP-40 Target Master Hot Rodimus 19cm / 7.5"
Sold Out

Features:  This is a KO version of MP-40 Targetmaster Hot Rodimus. Product photo is real shot. Generally the quality of this KO is decent (painting, joints). This set comes with a target master. *Note: Except for major defects, post-sale service of KO products can't be guranteed by us.    Status: 2020-5 A few sets in stock.   Parameters: Producer N/A Size Robot Form Approx. 19cm (7.5 Inches) Tall Material ABS Plastic Shipment From China Note KO Version  
Sale
Transformers Power of the Primes POTP Rodimus Prime
Sold Out

Features:  This POTP Rodimus Prime (Leader Class) is an official version in China's mainland market, not KO. We got a few stock with most favorable price.  Status: 2019-9 A few set in stock. Parameters: Producer Official  Size Same size as official version.  Material ABS Plastic Shipment From China Note N/A  
NB No-Brand LG07 LG-07 ( Equal to Classic 4.0 ) IDW Jetfire (Leader Class, Non-Official Version)
Sold Out

Features:  This No-Brand figure is an KO version of the official LG07 Jetfire (Classic 4.0 Jetfire ). According to all the reviews by our domestic customers, the pros and cons of this KO figure is as below: Cons:  Painting is not as good as the official version, a few batches would have problem in the ratchet joints on one arm (a little bit loose.) ** TFSAFARI would check if there's major defects of the toy before shipment but we are not able to offer post-sale service for this KO version on minor defects.    Status:  2019-8 In stock.   Parameters: Producer No Brand Size No data. Material ABS Plastic Shipment From China Note KO Version  
NB No-Brand Shockwave 2011 DOTM Voyage Class KO Version
Sold Out

Features:  This No-Brand figure is  KO version of the official 2011 DOTM Bayverse Shockwave. Pros:  Cheap with original box. Almost the same quality as the official released version.  Cons: None     Parameters: Producer No Brand Size Voyage Class Material ABS Plastic Shipment From China Note KO Version  
Transformers Power of the Primes POTP Optimal Optimus
Sold Out

Features:  This POTP Optimal Optimus    Parameters: Producer Official release Size N/A  Material ABS Plastic Shipment From China Note Not KO  
NB No-Brand IDW Combiner Wars CW Devastator 6 in 1 Set (Minified Non-Official Version, No Box) 32cm / 12.5"
Sold Out

Features:  This No-Brand figure is an Minified KO version of the official IDW Devastator. The toy would be sent without original box to guarantee the best price. According to all the reviews by our domestic customers, the pros and cons of this KO figure is as below: Pros: - No simplification on all the transformation process. - Minified size is now easier to handle and more compatible to other official combiners from Combiner Wars, Titans Return and POTP series- Quite good joints, no rickets.  Cons:  - Plastic used for the legs and arms is not as good as the official version.- Factory doesn't offer any post-sales service (For broken parts and spare parts you need to figure out it by yourself, due to its low price, TFSAFARI can't be responsible for the post-sales service.). - The hand of the scrapper is easily broken in some batches. See below link the way to fix it: https://www.tfw2005.com/boards/threads/the-knock-off-transformers-thread.191817/page-1841#post-16873697...
NB No-Brand MP19 MP-19 Smokescreen (Non-Official Version)
Sold Out

Features:  This No-Brand figure is an KO version of the official MP-19. According to all the reviews by our domestic customers, the pros and cons of this KO figure is as below: Pros:  No simplification on all the transformation process.  Almost no large seams in the vehicle mode (better than most of the KO figures.)   Cons:  Plastic used is not as good as the official version. Painting is a little bit thin. In some batches one arm is easily to drop off (still re-attachable).   Status 2020-7 In stock.   Parameters: Producer No Brand Size Robot Form Approx. 19cm (7.5 Inches) Tall Material ABS Plastic Shipment From China Note KO Version  
Sale

Unavailable

Sold Out

${{amount}}' jsondata = "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" >