Ratchet Studio

  • WishList
Ratchet Studio ROS-003S1 Gap Filler for Siege Ironhide Upgrade Kit
$12.99

Features: *Note:The original set ROS003 has been upgraded with enhanced details and 4 extra parts ( 2 extra parts for the legs, 2 for the bottoms of the feet). Still only the two hip extensions can't be included in the vehicle mode.  See before and after the gap filling, big difference isn't it? Whole set includes: 13 parts in total (11 Gap filling parts + 2 Leg lengthening parts as special bonus for 1st batch). Product would be packed in bulk (plastic bag + bubble envelope) to keep the lowest cost and price. *Ironhide figure is not included in the upgrade kit set. Note: (1) None of the gap filling parts would effect the transformation (vehicle mode wont be effected by the 11 gap filling parts), except for the leg lengthening parts (which means you need to remove the 2 leg lengthening parts before transformation).  (2) Only original color of the 3D printing material...
【MTO】Ratchet Studio ROS-002 Hip Extension Parts for Siege Ultra Magus Upgrade Kit
Sold Out

Features: *Note:The production of this set has totally stopped.Pls refer to ROS005 set which includes both leg extension parts and gap fillers for Siege Ultra Magnus. These 2 hip extension parts is to improve the figure proportion of robot form of SIEGE Ultra Magnus.See before / after photo as below: *Ultra Magnus figure is not included in the upgrade kit set. Note: (1) These 2 hip extension parts widen the gap between the truck head and the trailer so the overhead snap-fit connector (the red parts) would lose its function, while the lower connectors on the legs still work and the overall appearance of the vehicle mode wont be affected at all.  (2) Only original color of the 3D printing material is applied(milky white, close to the back of the figure, but not exactly the same, you need to customize it by yourself if you're not satisfied with the color ).  ...
  • WishList
Ratchet Studio ROS-005 Gap Filler and Leg Extensions for WFC Siege Ultra Magnus Upgrade Kit
$14.99

Features: Whole set includes: 22 parts in total (16 Gap filling parts + 2 Hip extension parts + 4 extra gap fillers for the legs which can also be used for Galaxy Upgrade Optimus Prime). *Ultra Magnus figure is not included in the upgrade kit set. Note: (1) All the gap filler parts won't effect the vehicle mode which means no need to remove any of the parts for transformation, including the hip extension parts. However the hip extension parts may lengthen vehicle mode a little bit, and disable one buckle above the truck head, pls be noted.  (2) Only original color of the 3D printing material is applied, NO PAINTING. (milky-white, you need to customize it by yourself if you're not satisfied with the color ). (3) The hidden surfaces are not polished so might not be smooth enough. Due to deviation in the process of 3D printing, the tightness of...
  • WishList
Ratchet Studio ROS-004 Gap Filler for WFC Siege Leader Galaxy Upgrade Optimus Prime COP Upgrade Kit
$13.99

Features: Whole set includes: 15 parts in total (13 Gap filling parts + 2 Hip extension parts as special bonus). *Optimus Prime figure is not included in the upgrade kit set. Note: (1) The hip extension parts, the shoulder armor parts and the gap fillers on the back pack would affect the transformation. You need to take all the parts off before transformation. Now Ratchet Studio have improved the tightness of the hip extension parts. It would be easier than ROS002 & 003 for you to remove the parts from the main body before transformation.  (2) Only original color of the 3D printing material is applied, NO PAINTING. (milky-white, you need to customize it by yourself if you're not satisfied with the color ). (3) The hidden surfaces are not polished so might not be smooth enough. Due to deviation in the process of 3D printing, the tightness of some small parts might...
  • WishList
Ratchet Studio ROS-003S2 Gap Filler for Siege Crosshair Upgrade Kit
$12.99

Features:     This is the black version of ROS003S to fit to the color style of the latest release Crosshair in the Siege line.  This set includes 2 filling parts for the bottom of the feet of Ironhide (as a bonus for those fans who's bought the old ROS003 sets)  *Crosshair figure is not included in the upgrade kit set. Note: (1) None of the gap filling parts would effect the transformation (vehicle mode wont be effected by the 11 gap filling parts), except for the hig extension parts (which means you need to remove the 2 leg lengthening parts before transformation).  (2) Only original color of the 3D printing material is applied(black, close to the back of the figure, but not exactly the same, you need to customize it by yourself if you're not satisfied with the color ). (3) The hidden surfaces are not polished so might not be smooth enough....
  • WishList
Ratchet Studio ROS-009 Gap Filler for Siege Ratchet Upgrade Kit
$12.99

Features:   Whole set includes: Gap fillers + Leg Extensions. This set is modified from ROS-003 (for Ironhide), still including the leg extension parts, while 2 × pads for the bottoms of the feet are added. Product would be packed in bulk (plastic bag + bubble envelope) to keep the lowest cost and price. *Siege Ratchet figure is not included in the upgrade kit set. Note: (1) None of the gap filling parts would effect the transformation (vehicle mode wont be effected by the 11 gap filling parts), except for the leg lengthening parts (which means you need to remove the 2 leg lengthening parts before transformation).  (2) Only original color of the 3D printing material is applied(milky white, close to the back of the figure, but not exactly the same, you need to customize it by yourself if you're not satisfied with the color ). (3) The hidden surfaces are not polished...
  • WishList
Ratchet Studio ROS-008 Gap Fillers for WFC Siege Impactor Upgrade Kit
$12.99

Features: Whole set includes: 16 parts in total (including 4 fillers which would be buried in the legs) *WFC Siege Impactor figure is not included in the upgrade kit set. Note: (1) All the gap filler parts won't effect the vehicle mode which means no need to remove any of the parts for transformation.  (2) Only original color of the 3D printing material is applied, NO PAINTING. ( Grey, you need to customize it by yourself if you're not satisfied with the color ). (3) The hidden surfaces are not polished so might not be smooth enough. Due to deviation in the process of 3D printing, the tightness of some small parts might be effected, so sometimes you may need glue to fix them in the body.   Status: 2020-2 A few sets coming in stock. We would stop this product after this batch due to low demand in the market. If...
  • WishList
Ratchet Studio ROS-006 Gap Fillers & Shoulder Rocket Launcher for WFC Siege Hound ( Hot Shot ) Upgrade Kit
$11.99

Features: Whole set includes: 8 parts in total ( 2 shoulder cannons + 2 back gap fillers + 4 leg gap fillers). *WFC Siege Hound figure is not included in the upgrade kit set. Note: (1) All the gap filler parts won't effect the vehicle mode which means no need to remove any of the parts for transformation. The shoulder rocket launcher can be installed both on the shoulder or in the legs.  (2) Only original color of the 3D printing material is applied, NO PAINTING. ( Black, you need to customize it by yourself if you're not satisfied with the color ). (3) The hidden surfaces are not polished so might not be smooth enough. Due to deviation in the process of 3D printing, the tightness of some small parts might be effected, so sometimes you may need glue to fix them in the body.     Status: 2019-9 In stock  ...
  • WishList
Ratchet Studio ROS-010 Upgrade Kit for Siege Barricade / Prowl / Smokescreen / Bluestreak (Hip Extensions / Propellers )
$10.99

Features: Well here comes the latest creation brought by Ratchet Studio for the Datsun brothers.  Whole set includes: 2 × Propellers (can be hidden in the legs of the robot mode)2 × Hip extensions (can be combined with the propellers to hold weapons in the vehicle mode) 1 × Connector (can be installed on the arm of the robot mode) *Siege Datsun figures are not included in the upgrade kit set. Note: (1) All the parts needs to be detached before transformation to form another mode. Two colors are available (Red for bluestreak, black for the other 3). (2) Only original color of the 3D printing material is applied (close to the back of the figure, but not exactly the same, you need to customize it by yourself if you're not satisfied with the color ). (3) The hidden surfaces are not polished so might not be smooth enough. Due to...
  • WishList
Ratchet Studio ROS-011 Gap Fillers & Hand Blades for Siege Spinister Upgrade Kit
$12.99

Features: Here comes the last upgrade set from Ratchet Studio for Siege Spinister, an happy ending for the excellent work they've done to improve the whole series. The two hand blades can transform into the landing gears of the helicopter mode.  Whole set includes: 8 x Gap fillers 2 x Hand blades  Product would be packed in bulk (plastic bag + bubble envelope) to keep the lowest cost and price. *Siege Spinister figure is not included in the upgrade kit set. Note: (1) None of the upgrade parts would effect the transformation. (2) Only original color of the 3D printing material is applied (black, grey, close to the back of the figure, but not exactly the same, you need to customize it by yourself if you're not satisfied with the color ).   Status: 2020-3 In stock   Parameters:  Producer Ratchet Studio Size Fit to Siege Spinister Material PLA Resin, No painting. Shipment...
Sale

Unavailable

Sold Out

${{amount}}' jsondata = "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" >