【Loose Pack】Mechanical Alliance BMB SX-01 SX01 Thunder Warrior ( Bumblebee Movie Blitzwing) 27cm / 10.5cm
$74.99
$149.99
50% OFF
Features:
Note:
(1) This is a reissue version with no worn painting (see photos for details);
(2) The product is brand new but would be shipped without its original box for convenience.
(3) The joints of this figure are quite loose according to feedbacks of some buyers which is considered to be accepted by you if you decide to buy it. No post-sales service can be offered for loose joints.
(4) 2 x LR41 for the head
This SX01 Thunder Warrior is originally designed by Mechanical Alliance, in homage to Blitzwing in the latest Bumblebee movie. It transforms into a Jet fighter and is of high articulation as shown in the movie.
Status:
2025-9 Reissue version in stock.
Parameters:
Producer
Mechanical Alliance, probably Sub-brand of Black Mamba (BMB)
Size
25-30cm tall
Material
ABS Plastic + Alloy
Shipment
From China
Note
Blitzwing
4th Party Legendary Toys BS-02 BS02 KO UT Ragoon (AOE / TLK Megatron)
$74.99
$89.99
17% OFF
Features: *Note: (1) Now for eyelight issue / headsculpt magnet issues the factory has stopped offering spare parts. Customer who had this problem would only be granted 3000 store points as a compensation. (2) Batteries might be removed for convenient in shipment. Battery Type： 2 x LR41 for the head 2 x LR41 for the blaster (3) We offer different buy options for this product, for loose pack product the outer color box would be removed while we still offer good protection for the figure. This is the KO version of UT R03 Ragoon with some modification and improvements. It is probably done by BMB. The size would be the same as the UT R03 Ragoon (a little bit shorter to fit better in size. ). Status Update: 2025-5 Reissue batch in stock. Parameters: Producer 4th Party, Black Mamba Size Robot Form Approx. 32cm (12 Inches) Tall Material ABS...
Magic Square MS-Toys MS-B35 MSB35 Blues (Jazz Legends Class) 9cm / 3.5"
$44.99
$49.99
10% OFF
Features:
This MS-B35 Blues in homage to G1 Jazz by Magic Square (MS-Toys, a famous 3rd party transformer studio focusing on pocket size toys), it transforms into an armed race car.
This set features:
- freely switched between two robot mode (with / without wings)
- Highly articulation
- A lot of accessories
- Improved vehicle mode (close to the relevant car in the reality)
Status:
2022-5 In stock.
Parameters:
Producer
Magic Square (MS-Toys)
Size
Robot Form Approx. 9cm (3.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
N/A
FansToys FansToys FT-51 FT51 Chomp (Skullcrusher MP size) 20cm / 8"
$149.99
$199.99
25% OFF
Features:
Another masterpiece by Fanstoys, details unknown yet. Anyway we all believe that it would inherit the best quality from Fanstoys following its previous two headmasters Dracula (Mindwipe) and Lupus (Weirdwolf)
Status:
2022-4 In stock.
Parameters:
Producer
Fanstoys (FT)
Size
Robot Form Approx. 20cm (8 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
MP size Skullcrusher
Dream Star Toys DST01-001 DST-01 Slingshoot Encourager Combiner ( Slingshot, Aerialbots , Superion) Metallic Version 22cm (8.5") DreamStarToys
$124.99
$129.99
4% OFF
Features:
The DST01-001 Slingshoot, in homage to the classic G1 image of Slingshot, is designed originally by Dream Star Toys (A new 3rd party studio for transformers). It transforms into a Harrier Jump Jet (accurately following the real design of the Harrier Jet).
This figure features:
- Metallic painting
- Die-cast parts added
- Extremely highly articulated waist joint
- All built-in design for the combiner mode (hand of the combiner is buit into this figure, no extra accessories are needed for the combiner mode)
This Encourager Combiner , by Dream Star Toys in homage to the G1 Superion is the mighty combiner of the 5 members with original design and matte metallic painting.
Status:
2022-4 In stock.
Parameters:
Producer
DST Toys / Dream Star Toys
Size
Height of Combiner 55cm (22") / Slingshoot 22cm / 8.5"
Material
ABS Plastic + Die cast
Shipment
From China
Note
Left arm
XTransbots MX-III+ MXIII+ MX-3+ MX3+ Eligos (Cyclonus ) Metallic Version X-transbots 28cm / 11"
$149.99
$169.99
12% OFF
Features:
This MX- III+ by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Scourge ). It can transform into a Cybertronian spaceship with vivid metallic painting.
The whole set may include (final content may vary according to the manufacturer):
- 1 x Main figure
- 1 x G1 pistol
- 1 x Laser rifle
- 1 x Target master
- 1 x Katana
- 1 x pilot
- several changeable head sculpts and faces
- Bio card and instructions.
Status
2022-5 In stock.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 28cm (11 Inches) Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
BPF Commander (OS Oversized WFC Siege OP) 20 cm / 8"
$29.99
Features:
Oversized WFC Siege OP with improved painting, and die-cast parts added
Status：
2022-4 New batch in stock.
Parameters:
Producer
BPF
Size
Oversized WFC Siege OP
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
N/A
Keith's Fantasy Club KFC EAVI Metal Phase P-6B P6B Dumpyard (Junkyard) 20cm
$99.99
$119.99
17% OFF
Features:
This P6B Dumpyard, with its brother Crashhog, issued by KFC toys, transforms into vintage motorcycle in its disguise form.
Highlights in design:
Exchangeable arms, heads and chest armors (with dumpyard);Rubber tyres with 2 forms;A lot of weapons. Perfect details.
Whole set Includes:
- 1 x Main figure;- 2 × Laser guns; - 1 × Cross Axe;- 1 × Sword;
Status：
2022-4 A few sets in stock on sale.
Parameters:
Producer
Keith's Fantasy Club (KFC)
Size
Robot Form Approx. 20cm (8 Inches) Tall
Material
ABS Plastic + Alloy parts (Thighs, feet, handles)
Shipment
From China
Note
MP size
Dr.Wu & Mechanic Toy SA01T SA-01T Steve Train (Hearts of Steel Bumblebee) 13cm / 5.1"
$44.99
Features:
*Note: This figure features a special You-know-what-it-is locomotive face.
This SA01T Steven Train is paying homage to the image in IDW comic: Hearts of Steel. This robot transforms into locomotive with a hammer as its weapon. This is a reissue version of HS14 Iron Hero Bumblebee with modified model, more re-painted veraions and better plastic materials.
The whole set includes:
1 x Main figure
1 x part of rail (can be connected with the rails of other sets in this series)
1 x Weapon (Hammer or pickaxe)
More sets would be released in this series in the future.
Status:
2022-8 In stock.
Parameters:
Producer
Mehanic Toy & Dr.Wu
Size
Robot Form Approx. 13cm (5.1 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Inspired by IDW Comic: Hearts of Steel
Dr.Wu & Mechanic Toy SA01B SA-01B Centurion (Hearts of Steel Bumblebee) 13cm / 5.1"
$44.99
Features:
This SA01B Centurion is paying homage to the image in IDW comic: Hearts of Steel. This robot transforms into locomotive with a hammer as its weapon. This is a reissue version of HS14 Iron Hero Bumblebee with modified model, more re-painted veraions and better plastic materials.
The whole set includes:
1 x Main figure
1 x part of rail (can be connected with the rails of other sets in this series)
1 x Weapon (Hammer or pickaxe)
More sets would be released in this series in the future.
Status:
2022-8 In stock.
Parameters:
Producer
Mehanic Toy & Dr.Wu
Size
Robot Form Approx. 13cm (5.1 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Inspired by IDW Comic: Hearts of Steel
Dr.Wu & Mechanic Toy SA02 SA-02 Leap (Hearts of Steel Cliffjumper) 13cm / 5.1"
$44.99
Features:
This SA02 Leap is paying homage to the image in IDW comic: Hearts of Steel. This robot transforms into locomotive with a hammer as its weapon. This is a reissue version of HS14 Iron Hero Bumblebee with modified model, more re-painted veraions and better plastic materials.
The whole set includes:
1 x Main figure
1 x part of rail (can be connected with the rails of other sets in this series)
1 x Weapon (Hammer or pickaxe)
More sets would be released in this series in the future.
Status:
2022-8 In stock.
Parameters:
Producer
Mehanic Toy & Dr.Wu
Size
Robot Form Approx. 13cm (5.1 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Inspired by IDW Comic: Hearts of Steel
Dr.Wu & Mechanic Toy SA01 SA-01 Wasp (Hearts of Steel Bumblebee) 13cm / 5.1"
$44.99
Features:
This SA01 Wasp is paying homage to the image in IDW comic: Hearts of Steel. This robot transforms into locomotive with a hammer as its weapon. This is a reissue version of HS14 Iron Hero Bumblebee
The whole set includes:
1 x Main figure
1 x part of rail (can be connected with the rails of other sets in this series)
1 x Weapon (Hammer)
More sets would be released in this series in the future.
Status:
2022-8 In stock.
Parameters:
Producer
Mech Planet / Hot Soldiers
Size
Robot Form Approx. 13cm (5.1 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Inspired by IDW Comic: Hearts of Steel
BMB Black Mamba LS-03 LS03 (KM01 / KM-01)Optimus Prime (Oversized OS MPM04) 32cm / 13"
$67.99
$119.99
43% OFF
Features:
*Note: On the current batch the product code of this set would be changed from LS03 to KM01
BMB's LS03 OP is an oversized MPM04 version by BMB Black Mamba (One of the best 4th / 3rd party transformer producer) with upgrades as below:
More detailed painting added to the body.
Shoulders and Chest re-adjusted to make the whole figure more coordinated and closer to the image in the movie.
Upgraded Alloy / Diecast parts. (Shoulders, Feet, make them less vulnerable in transformation)
Replaceable Rubber Tyres, More accesories and weapons (Blades, Hooks, Axe, Pistols )
This one can be a special addition to your TF showcase.
Status:
2025-4 Reissue batch in stock.
Parameters:
Producer
Black Mamba (BMB)
Size
Robot Form Approx. 32cm (13 Inches) Tall
Material
ABS Plastic + Alloy
Shipment
From China
Note
Oversized version of MPM04
Transart TA BWM-05R BWM05R Mighty Guardian (BW Beast Transmetal Optimus Primal ) Red Version 24cm / 9.5"
$64.99
$134.99
52% OFF
Features:
*Note: This is the new red version of BMW-05.
This BMW-05 Mighty Guardian, in homage to Transmetal Optimus Primal in Beast wars universe is another Quadra changer by TRANSART (A new 3rd party transformers producer which may probably focus on BW line), stands 25 cm (6.5 inches) and transforms into a mechanic gorilla, an armed motor and an cybertronian spaceship.
Status:
2025-11 New batch in stock on sale.
Parameters:
Producer
TRANSART
Size
Robot Form Approx. 24cm (9.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Inspired by Beast Wars Ravage
Mechfanstoys MFT MF53 MF-53 Trailer (Hoist) Mech Fans Toys 10.5 cm / 4.1"
$26.99
$32.99
18% OFF
Features:
This MF-53 Trailer is the latest legends class figure made by MechFansToys, a famous 3rd party transformer studio focusing on pocket size toys), with excellent movability and details.
It comes with a lot of accessories and transforms into a pick-up truck, in homage to G1 Hoist.
Status:
2022-4 New batch in stock.
Parameters:
Producer
Magic Square (MS-Toys)
Size
Robot Form Approx. 11cm (4.3 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legendary-sized Perceptor
Dr.Wu & Mechanic Studio Extreme Warfare 6 Sets DW-E09 / 10 / 12 / 13/ 15 / 16 Seaspray / Starscream / Powerglide / Thundercracker / Skywarp / Blaster fit to Earthrise Titan Class 2 in 1 set 6cm / 4.6"
$79.99
$89.99
11% OFF
Features:
*Note: This link is for the total six sets together:
DW-E09 / 10 / 12 / 13/ 15 / 16 Seaspray / Starscream / Powerglide / Thundercracker / Skywarp / Blaster
Dr.Wu's new series of core class G1 figures with its size coordinated to the official Titan Class figures (Arch, Metroplex, Ark, Scorponok) and etc.
Both of the two figures are tiny (about half as tall as a coke tin) but transformable and with inpressive details.
More figures are coming in this line according to our current knowledge.
Status:
2022-4 In stock.
Parameters:
Producer
Dr.Wu Studio
Size
N/A
Material
Plastic
Shipment
From China
Note
Upgrade Kit
Transart TA BWM-05 BWM05 Mighty Guardian (BW Beast Transmetal Optimus Primal ) 24cm / 9.5"
$64.99
$149.99
57% OFF
Features:
*Note: Current batch doesn't include the base stand.
This BMW-05 Mighty Guardian, in homage to Transmetal Optimus Primal in Beast wars universe is another Quadra changer by TRANSART (A new 3rd party transformers producer which may probably focus on BW line), stands 25 cm (6.5 inches) and transforms into a mechanic gorilla, an armed motor and an cybertronian spaceship.
Status:
2026-Jan: Reissue batch in stock.
Parameters:
Producer
TRANSART
Size
Robot Form Approx. 16.5cm (6.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Inspired by Beast Wars Ravage
Toy House Factory THF-01J THF0J Sonic Wave (w/ One Cassette Only) 25cm (MP-13 Soundwave)
$39.99
$54.99
27% OFF
Features:
*Note: Loose Pack item are new / unused item with the original box removed only. TFSAFARI would still offer well protection of the item even without its original box.
This THF01 Sonic Wave is an KO version of offical MP21 Soundwave with some upgrades in the design. All Diecast / alloy parts have been retained.
Two colors are available now. Classic G1 color (Deep Blue) and black.
The whole set includes 1 cassette (Laserbeak for 01J & Ratbat for 01B ) only but the soundwave is able to carry 6 cassette robots. See related products in THF for extra cassettes.
Pls buy the 6 in 1 Cassette warriors here;
THF01P6 6 in 1 Cassette Warriors
Status：
2025-8 Reissue batch in stock.
Parameters:
Producer
Toy House Factory
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
Mechanical Alliance Mechanical Team BB-02 BB02 Wasp Warrior (Oversized Studio Series ROTF Bumblebee ) 30cm / 12"
$69.99
Features:
This BB02 Wasp Warrior is an oversized version of SS49 Bayverse bumblebee. It is with brand-new black version and enhanced painting details.
Status:
2022-4 New batch In stock.
Parameters:
Producer
Mechanical Alliance, probably Sub-brand of Black Mamba (BMB)
Size
30cm tall
Material
ABS Plastic + Alloy
Shipment
From China
Note
OS SS49 black version
Emonster EM05 EM-05 Gladiator Diaclone 1:60
$34.99
Features:
Find other Emonster Diaclone-like power suits & pilots here Emonster
This EX-05 Gladiator brought by E-monster Studio (focusing on upgrade kits for Diaclone line) is designed originally by the studio, fit in size with all diaclone line vehicles.
The figure comes with melee weapons and add-on armors, while can be combined together with EM04 or exchange its parts with other figures EM01-03 to realize infinite possibility in its playability.
Status:
2021-12 In stock.
Parameters:
Producer
E-Monster
Size
Fits to Diaclone line in size, 1:60 size
Material
ABS plastic
Shipment
From China
Note
Upgrade Kit
Before And After BA02 BA-02 Six Sigma ( Six-Gun ) w/ Slammer Japan Red Arm Version for LG / SDCC / IDW / MT Maketoys Metroplex 30cm
$84.99
$109.99
23% OFF
Features:
*Note:
1. This link is for the Red arm Version fitting better to US version IDW Metroplex;
2. This set is old stock, while no spare parts would be available.
Brought by Before & After , this BA-02 Six Sigma is designed to work as an enhanced upgrade weapons for the IDW Metroplex.
Status:
2022-4 In stock.
Parameters:
Producer
Before and After
Size
30cm
Material
Plastic
Shipment
From China
Note
Upgrade Kit for Metroplex
Knight 8801 (Previous 6022A) Optimus Prime (Modified KO SS05) & Weapon Set 17.5cm / 6.9"
$29.99
$39.99
25% OFF
Features:
*Note: The link contains different buy options with different prices:
6022A Main figure
6022A Weapon Set
6022A Main figure + weapon
Pls make sure you choose the right one you want.
The 6022A Optimus Prime is a modified SS05 figure featureing:
- fire-like painting added to chest / shoulder / shins
- headscult added, enhanced painting.
- including 1 x main figure, 2 x blades, 2 x headsculpts.
The weapon set includes:
1 x Ion blaster
2 x Shot guns
1 x shiled
1 x belly shield
1 x Energon axe
The weapons fits to most of SS series Optimus Prime in its size like SS-05, SS-32, SS-44.
Status:
2022-4 In stock
Parameters:
Producer
BAIWEI (Knight)
Size
17.5cm
Material
Plastic
Shipment
From China
Note
Upgrade Kit
Iron Factory IF EX-20D EX20D Desert Rose (Sandstorm) 9cm / 3.54" IronFactory
$39.99
$44.99
11% OFF
Features:
IF EX-20D Desert Rose (Sandstorm) is another redeco version of IF EX-20, the legendary-sized but exquisite presentation of Starscream by Iron Factory . （Famous 3rd party transformers studio focusing on legends size toys）It transforms into a Jet fighter.
The robot is small but with no simplification in its painting, movability and fun in the process of transformation.
Status:
2022-4 In stock.
Parameters:
Producer
Iron Factory (IF)
Size
Robot Form Approx. 9cm (4.5 Inches) Tall
Material
ABS
Shipment
From China
Note
Redeco of Wing of Tyrant IF EX20
Transform and Rollout TR-01 TR01 Hova (Jazz) 20cm / 8"
$54.99
$69.99
21% OFF
Features:
Transorm and Rollout (TR) is a brand-new studio however they've done a great job on this TR01 Jazz, a good figure to play with and a interesting addition to your showcase before the official release of MP Jazz.
- MP Size- Perfect Representation of G1 Jazz. - Features a grappling hook with a pull back mechanism
Status:
2023-7 Reissue batch in stock.
Parameters:
Producer
Transorm and Rollout (TR)
Size
Robot Form Approx. 20cm (8 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size, Original Design
Mechanical Alliance Mechanical Team MT-05 MT05 Mixer (Mixmaster) (Oversized Studio Series ROTF Devastator )
$54.99
$59.99
8% OFF
Features:
This MT05 Mixer is an oversized version of ROTF Devastator with die cast parts and articulated hands added, and more joints are included too.
Status:
2022-3 New batch In stock.
Parameters:
Producer
Mechanical Alliance, probably Sub-brand of Black Mamba (BMB)
Size
25-30cm tall
Material
ABS Plastic + Alloy
Shipment
From China
Note
KO ROTF Devastator
Transformers Generations War for Cybertron WFC-16 Netflix Leader Class Nemesis Prime Spoiler Pack
$94.99
Features:
This WFC Netflix Nemesis Prime (Leader Class) Spoiler Pack is an official version in Chinese market, not KO. We got a few sets in stock.
Status:
2022-3 A few sets in stock.
Parameters:
Producer
Official
Size
N/A
Material
ABS Plastic
Shipment
From China
Note
N/A
GigaPower GP HQ-05R HQ05R Gaudenter (Swoop) Blue Chrome Version Giga Power 26cm / 10.5"
$189.99
$219.99
14% OFF
Features: Note: *Current batch DOES NOT include the special bonus （sold out，Spot lights and remote control）. HQ05R Gaudenter (in homage to Dinobot Swoop)is the latest master piece brought by GP / Gigapower (famous 3rd party transformer studio focusing on collectible grade transformer action figure). For Gaudenter GP has been keeping its consistent quality and design. A must-buy collection for your show case. Whole set includes: - 1 × Main body- 2 × Cannons- 2 × Swords- 2 × Heads- 1 × Bird Mode Head- 1 × Transparent protecting box- 1 × Platform- 1 × Bracket Other FIgures includes in the photos are only for comparison and not included in this toy set. The toy doesn't includes battery for the light effect. Battery spec: 2 × CR1025 for sword Status: 2022-3 New batch in stock. Parameters: Producer Gigapower (GP) Size Robot Form Approx. 26cm (10.5 Inches) Tall Material ABS + Alloy / Diecast...
WJ Oversized Battle Damaged MPP10 Optimus Prime Limited Edition with Display Base 33cm / 13"
$99.99
$129.99
23% OFF
Features:
1. There would be no after-sales spare parts can be offered for WJ products.
2. This is a complete version with everything shown on the product photo including the rock-like display base.
Status:
2022-3 A few sets in stock on sale.
Parameters:
Producer
Weijiang
Size
MP Size
Material
ABS Plastic
Shipment
From China
Note
Limited version, no spare parts can be offered
【Loose Pack】4th Party TFP Commander Class NOT Optimus Prime / Megatron / Ultra Magnus / Bulkhead / Ironhide 10cm / 4"
$19.99
$24.99
20% OFF
Features:
1. These should be 1:1 KO products and would be shipped WITHOUT the origional box.
2. Comparing to the original version there might be some minor defects as below:
(1) Some joints might be loose and you need to strengthen them by yourself.
(2) The coating on some parts are a little bit overflowed.
Status:
2022-3 In stock.
Parameters:
Producer
4th Party
Size
10cm / 4"
Material
Plastic
Shipment
From China
Note
1:1 KO
Xtransbots XTB MM-VII MMVII MM-7 MM7 Hatch (Tailgate) Reissue Toy Version 14cm / 5.5"
$49.99
$69.99
29% OFF
Features:
This MM-7 Hatch by Xtransbots (A famous 3rd party transformer studio) is a deformation robot with its size perfectly matching official MP series (in homage to G1 Tailgate). It can transform into a race car.
Note: Our stock is toy version, so the legs are of Silver color.
Status：
2022-3 New batch in stock on sale.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 14cm (5.5 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
Xtransbots XTB MM-VI MMVI MM-6 MM6 Boost (Windcharger) Reissue Toon Version ( Silver Leg) 14cm / 5.5"
$49.99
$69.99
29% OFF
Features:
This MM-6 Boost by Xtransbots (A famous 3rd party transformer studio) is a deformation robot with its size perfectly matching official MP series (in homage to G1 Windcharger). It can transform into a race car.
Note: Our stock is toon version, so the legs are silver.
Status:
2022-3 New batch in stock on sale.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 14cm (5.5 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
NA NewAge H13B H-13B Samuri Michael (Shattered Glass Starscream) New Age 9cm / 3.5"
$59.99
$69.99
14% OFF
Features: *Note: This is a shattered Glass version of H13 Lucifer including diversified accessories as well as a new headsculpt and two energon swords. This New Age H13 Lucifer ( Inspired by G1 Starscream ), brought by NewAge ( A new 3rd party Transformer Studio focusing on pocket size toys) is of legends scale and transforms into a F16 Jet fighter. This figure follows the design of the Masterpiece line from the official, with amazingly high articulation and baking-like finishing on some parts. It's hard to imagine that a legends-scale figure can be like a MP-size figure in its articulation, details and playability. The whole set includes 1 × main figure, several fire effect parts, several changeable hands with different gestures, one megatron gun, and one stand. The coronation parts would be with the transparent ghost version only. The bases of the stands of the 3 seekers can combine into the space bridge scenario. Its size is...
NA NewAge H13C H-13C Lucifer (Starscream) V1.5 Cartoon Limited Version New Age 9cm / 3.5"
$62.99
Features: *Note: This is a limited cartoon version of H13 Lucifer including diversified accessories as well as a new headsculpt. This New Age H13 Lucifer ( Inspired by G1 Starscream ), brought by NewAge ( A new 3rd party Transformer Studio focusing on pocket size toys) is of legends scale and transforms into a F16 Jet fighter. This figure follows the design of the Masterpiece line from the official, with amazingly high articulation and baking-like finishing on some parts. It's hard to imagine that a legends-scale figure can be like a MP-size figure in its articulation, details and playability. The whole set includes 1 × main figure, several fire effect parts, several changeable hands with different gestures, one megatron gun, and one stand. The coronation parts would be with the transparent ghost version only. The bases of the stands of the 3 seekers can combine into the space bridge scenario. Its size is compatible with other...
4th Party MW Model Wizard BMB T-10S T10S Earthquake Star Sky Wings ( NOT Oversized MPM10 Starscream ) Seibertron Color Version 34cm / 13"
$119.99
Features:
Note: This is the Seibertron Color version of T10
Brought by Model Wizard (MW) Studio (A new 4th party transformer producer, said to be the avatar of Weijiang), This T10 Earthquake Star Sky Wing, is an oversized version of the official MPM10 Starscream with enhanced painting details and alloy parts added.
The figure features:
- Matte grey painting;
- LED eye lights;
- Fully articulated hands;
- Enhanced details on the head.
Status:
2022-3 New batch in stock
Parameters:
Producer
Unknown
Size
Robot Form Approx. 33cm (13 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Oversized version of MPM10
Eagle EG01N EG-01N Not MP52+ MP-52+ (Skywarp Upgraded Version ) 25cm / 10"
$69.99
$84.99
18% OFF
Features: Note: 1. There's no spare part available for this figure. 2. This is is a 1:1 KO version of MP52+ (in homage to MP2.0 Skywarp) with some improvement. The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China: Pros: - No simplification in structure and transformation. 1:1 full version KO. - Some easily crackable parts of the original figure are changed to nylon ones - All accessories (replacement parts, special effect parts, stand platforms.) are included. - Painting are similar to the original figure Cons - Still some seams can be found and hard to adjust on the plane mode; - Details on the head sculpts are not as good as the original one. - Some joints are too tight to transform. Status: 2022-3 New batch in stock. Parameters: Producer Eagle Size Robot Form Approx. 25cm (10 Inches) Tall Material ABS Plastic + Diecast...
Magic Square MS-Toys MS-B31 MSB31 Detective (Hound Legends Class) 9cm / 3.5"
$44.99
$49.99
10% OFF
Features:
This MS-B31 Detective in homage to G1 Hound by Magic Square (MS-Toys, a famous 3rd party transformer studio focusing on pocket size toys), it transforms into an armed Jeep.
This set comes with:
- 1 x Detective main figure
- 1 x Blue light effect part
- 1 x Laser pistol
- 1 x Cage (designed for Ravage)
Status:
2022-3 In stock.
Parameters:
Producer
Magic Square (MS-Toys)
Size
Robot Form Approx. 9cm (3.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
N/A
Moon Studio MS-03 Iron Arm, Radiatron (Not G1 Kaen, Raiden ) 21cm / 8.3"
$124.99
Features:
This MS-03 Iron Arm, by Moon Studio in homage to the G1 Kaen is the 3rd member of the mighty combiner Radiatron (in homage to G1 Raiden, the combiner of the train bots.) It transforms into a high-speed train and the lower body of the combiner.
Status:
2022-3 In stock.
Parameters:
Producer
Moon Studio (Possible avatar of Zeta Toys )
Size
Height of Robot 21cm / 8.3", Height of the combiner around 55cm
Material
ABS Plastic
Shipment
From China
Note
Combiner member
Before And After BA02 BA-02 Six Sigma ( Six-Gun ) w/ Slammer US Black Arm Version for LG / SDCC / IDW / MT Maketoys Metroplex 30cm
$59.99
$109.99
45% OFF
Features:
*Note:
1. This link is for the Black Arm Version fitting better to US version IDW Metroplex;
2. This set is old stock, while no spare parts would be available.
Brought by Before & After , this BA-02 Six Sigma is designed to work as an enhanced upgrade weapons for the IDW Metroplex.
Status:
2022-3 In stock.
Parameters:
Producer
Before and After
Size
30cm
Material
Plastic
Shipment
From China
Note
Upgrade Kit for Metroplex
NA NewAge H27X H-27X Tromo(Optimus Prime) w/ Convoy Toxitron Version New Age 11cm / 4.3"
$109.99
Features:
*Note: This is a brand-new version of Newage H27 with a different color tone as well as some more accessories.
This NA H27X Tromo would be a new legends class figure , brought by NewAge ( A famous 3rd party Transformer studio focusing on pocket size toys)
This figure features:
- Baking paintings
- Transparent truck windows
- Soft latex antellas (of the head), and pipes
- Die-cast parts and Matrix of Leadership
- High articulation (3-piece hip and waist joint, separated feet and heels)
- Openable truck door under vehicle mode.
The whole set includes:
1 x Tromo main figure
1 x Energon Axe
1 x Energon Hook
1 x Ion Blaster
1 x Toxic Blaster
2 x Changeable hands
1 x Convoy
1 x Roller
Status:
2022-3 In stock.
Parameters:
Producer
NewAge (NA)
Size
Unknown
Material
ABS Plastic
Shipment
From China
Note
Legends class toy
NA NewAge H42EX H-42EX Shean (Mirage) Limited Version New Age 7.5cm / 3"
$54.99
Features:
*Note: A limited version with modified color and head sculpt
This NA H42EX Shean would be a new legends class figure ( in homage to G1 Mirage), brought by NewAge ( A famous 3rd party Transformer studio focusing on pocket size toys)
This figure features:
- Baking paintings
- Die-cast feet
- Built-in shoulder cannon with changeable missile.
The whole set includes:
1 x Main figure
1 x Laser gun
1 x Missile for shoulder cannon
Status:
2022-3 In stock.
Parameters:
Producer
NewAge (NA)
Size
Robot form 3" tall.
Material
ABS Plastic
Shipment
From China
Note
Legends class toy
NA NewAge H27F H-27F David (Optimus Prime) Youth Version (No Trailer, Simplified Version) New Age 11cm / 4.3"
$49.99
$59.99
17% OFF
Features:
*Note: This so-called Youth version is a simplified version of Newage H27 David with features as below:
- No Die-cast parts
- No Chrome painting
- No Color box & Trailer
- No Rollers
This NA H27 David would be a new legends class figure ( in homage to G1 Optimus Prime ), brought by NewAge ( A famous 3rd party Transformer studio focusing on pocket size toys)
The whole set includes:
1 x David main figure
1 x Energon Axe
1 x Ion Blaster
2 x Changeable hands
Status:
2022-3 New batch in stock.
Parameters:
Producer
NewAge (NA)
Size
11cm
Material
ABS Plastic
Shipment
From China
Note
Legends class toy
APC Toys APC-007 APC007 Galaxy Mob ( 1:1 TFP Vehicon Deluxe Class ) 2 Sets
$53.99
$55.99
4% OFF
Features:
*Note: This link is for 2 sets sold at a favourable price.
Brought by APC Toys (A new 4th / 3rd party studio), this APC007 Galaxy Mob is designed following the model of official TFP Vehicon with improved details and painting, and is a little bit oversized.
Status:
2025-3 Reissue batch in stock.
Parameters:
Producer
APC Toys
Size
13cm / 5"
Material
Plastic
Shipment
From China
Note
1:1 TFP Soundwave
Zeta Toys ZC01/ZC02/ZC03/ZC04/ZC05 Superitron Mini Kronos (Superion) Pocket Size 5 sets Combiner 24cm
$219.99
$229.99
4% OFF
Features:
This Superitron Mini , by ZETA Toys in homage to the Superion, is a legend class combiner made up by 5 members. It contains 5 members as below:
ZC01 Downthrust (Skydive)
ZC02 Sky Strike (Air Raid)
ZC03 Silver Arrow (Silver Bolt)
ZC04 Flyfire (Fireflight)
ZC05 Catapult (Slingshot)
The combiner is about 23cm-24cm tall, perfectly compatible with the MS-Toys Menasor / Devastator, as well as the Newage Devastator.
Status：
2022-3 In stock
Parameters:
Producer
Zeta Toys
Size
Combiner mode 23cm-24cm tall
Material
ABS Plastic
Shipment
From China
Note
Pocket size combiner.
FansToys FT-46 FT46 Tesla ( Perceptor) 2.0 Version Fans Toys
$149.99
$169.99
12% OFF
Features:
Note: Fanstoys informed that there's no spare part service available now for this figure. Buyers have to bear the risk by yourself for the defects.
Another masterpiece by Fanstoys, details unknown yet, in homage to G1 Perceptor. This is a so-called 2.0 version with an improved new design comparing to the old version.
Status:
2023-4 In stock.
Parameters:
Producer
Fanstoys (FT)
Size
Unknown yet
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
MP size Perceptor
Xtransbots XTB MM-XII MMXII MM-12 MM12 Neptune ( Seaspray, MP Scale ) X-transbots 12cm / 5"
$54.99
$69.99
21% OFF
Features:
*Note: A few sets in stock on sale, no post-sale service can be offered according to the factory.
This MM - XII Neptune by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Seaspray ). It transforms into a hovercraft with water skiing accessories which can be connected to MP21 Bumblebee (not included in this set)
Whole set includes:
1 × Neptune main figure 1 × Weapon 1 × Water skiiing parts 2 × Water effect parts
Status:
2022-2 A few sets in stock on sale.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 12cm (5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size
Xtransbots XTB MM-VIIIG2 MMVIIIG2 MM-8G2 MM8G2 Arkose Metallic Version ( Beachcomber, MP Scale ) X-transbots 12cm / 5" G2 Green Metallic Version
$49.99
$74.99
33% OFF
Features:
*Note: A few sets on sale, no post-sale service can be offered.
This MM - VIII Arkose by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Beachcomber ). It transforms into a Chenowth FAV.
Whole set includes:
1 × Arkose main figure1 × Weapon1 × Changeable golden fist1 × Changeable mask3 × Bird Figures
Status:
2022-2 A few sets in stock on sale.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 12cm (5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size
Xtransbots XTB MM-VIII MMVIII MM-8 MM8 Arkose Metallic Version ( Beachcomber, MP Scale ) X-transbots 12cm / 5"
$54.99
$74.99
27% OFF
Features:
*Note: A few sets on sale, no post-sale service can be offered.
This MM - VIII Arkose by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Beachcomber ). It transforms into a Chenowth FAV.
Whole set includes:
1 × Arkose main figure1 × Weapon1 × Changeable golden fist1 × Changeable mask3 × Bird Figures
Status:
2022-2 A few sets in stock on sale.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 12cm (5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size
Magic Square MS-Toys MS-01X+ MS01X+ Light of Freedom ( Optimus Prime) MP Size Metallic Version Reissue 24cm
$99.99
$119.99
17% OFF
Features: *Note: This is the MS-01X+ version with metallic finishing. According to MS Toys, there would be no more spare parts available for this figure. This MS-01 Optimus Prime is the metallic version of MS-01 by Magic Square (MS-Toys, a relatively new 3rd party transformer studio focusing on pocket size toys) in MP Size transformers, with features as follows: - Matt finish paint is applied to the whole body, with texture very close to the coming official MP-44 Optimus Prime. - Different electroplated parts, transparent parts are used to enhance the details. - The Matrix of Leadership is made of diecast. - The whole figure with its unique texture gives an advanced presentation of the classic G1 optimus prime, quite different from other G1 MP-sized OPs issued before. - See the difference between MS-01X Metallic Version on the right and the MS-01 Original version on the left. Status 2022-2 Reissued batch in...
Eagle EG01J EG-01J Not MP52+ MP-52+ (Upgraded Version Thundercracker) 25cm / 10"
$69.99
$84.99
18% OFF
Features: Note: 1. Currently there's no spare parts available for this figure. 2. This is is a 1:1 KO version of MP52+ (in homage to MP2.0 Thundercracker) with some improvement. The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China: Pros: - No simplification in structure and transformation. 1:1 full version KO. - Some easily crackable parts of the original figure are changed to nylon ones - All accessories (replacement parts, special effect parts, stand platforms.) are included. - Painting are similar to the original figure Cons - Still some seams can be found and hard to adjust on the plane mode; - Details on the head sculpts are not as good as the original one. - Some joints are too tight to transform. Status: 2022-2 New batch in stock. Parameters: Producer Eagle Size Robot Form Approx. 25cm (10 Inches) Tall Material ABS Plastic +...
Eagle EG01 EG-01 Not MP52 MP-52 (Upgraded Version Starscream) 25cm / 10"
$89.99
Features:
Note: No Post-sale service (spare part) is available for this figure.
The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China:
Pros:
- No simplification in structure and transformation. 1:1 full version KO.
- Some easily crackable parts of the original figure are changed to nylon ones
- All accessories (replacement parts, special effect parts, stand platforms.) are included.
- Painting are similar to the original figure
Cons
- Still some seams can be found and hard to adjust on the plane mode;
- Details on the head sculpts are not as good as the original one.
- Some joints are too tight to transform.
Status:
2022-2 New batch in stock.
Parameters:
Producer
Eagle
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO Version
Transcraft TC TC-02R T02R Red Jump (Bumblebee Movie Cliffjumper) 17cm / 6.7"
$79.99
$99.99
20% OFF
Features:
*Note: This is the red painting version (Cliffjumper version) of TC02 with a new headsculpt and a bit of revision on the model.
TransCraft is a brand-new studio, here comes the new TC02 Beettle (in homage to the bumblebee in bumblebee movie) after their successs in MXG-01. The robot is with matte-painting (similar to the painting in the movie) and it transforms into a vintage Volksvagen Bumblebee.
This set is considered in a lot of the reviews as the best Bumblebee movie bumblebee toy figure ever with its creative design in its transformation and body structure.
Status:
2022-3 New batch in stock.
Parameters:
Producer
TransCraft (TC)
Size
Robot Form Approx. 17cm (6.7 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
N/A
APC Toys APC-004BF APC004BF Bossy Flame ( 1:1 TFP Galvatron Voyage Class ) 20cm / 8"
$39.99
$52.99
25% OFF
Features:
*Note: APC-004BF Bossy Flame is a repainted version of APC004 Dark Master with a brand new headsculpt.
Brought by APC Toys (A new 4th / 3rd party studio), this Dark Master is made after the model of official TFP Optimus Prime, with new painting and more weapons, as well as some modification on the original models as below:
- Now the feet of the Dark master can be fully grounded
- The chest and head sculpt of the figure have been modified to fit better to the image of Megatron in the TFC animations.
- All joints have been upgraded
- Matte silver painting.
Status:
2022-3 In stock
Parameters:
Producer
APC Toys
Size
20cm / 8"
Material
Plastic
Shipment
From China
Note
1:1 TFP Megatron (Voyage Class)
No Brand NB 4th Party KO MP49 MP-49 Black Convoy (Nemesis Prime) Neutral Packing Version 25cm / 10"
$99.99
$124.99
20% OFF
Features: This is is a 4th party KO version of MP49 Black Convoy (Black OP 3.0) No formal packing for this set. It is probably manufactured by BMB so good post-sales service can't be expected. The below are pros and cons of this KO set based on the feedback from our domestic customers in China: Only some accessories are included. Convoy is not included. Pros: - No simplification in structure and transformation. 1:1 full version KO. - No major or common defects are found in bulk. - Joints on knees and ankles are enhanced. - Light effect added to the jet pack. Cons - Plastic material used are not as good as the official version. - Still the hip joints are loose on some sets (same to official version) - On some figures, Some parts don't fit precisely，seams can be found on robot mode. (like inner parts of the...
Iron Factory IF EX-55 EX55 Surfing Arrow（Seaspray）10cm / 4"
$37.99
$39.99
5% OFF
Features:
This EX-55 Surfing Arrow (in homage to IDW Seaspray) by Iron Factory（Famous 3rd party transformers studio focusing on legends size toys) is a transformable robot figure which can transform into an armed hovermarine.
Status:
2022-3 In stock.
Parameters:
Producer
Iron Factory (IF)
Size
Robot form 10cm / 4"
Material
ABS
Shipment
From China
Note
IDW
Big Fire Bird Toy EX-01 Plus EX01Plus EX01P Mooka Mocha (Arcee) 19cm / 7.5"
$129.99
$139.99
7% OFF
Features:
*Note: This would be a repainted black version for EX01 Nicee with new painting as well as newly added weapons, extra headsculpts as well as other accessories.
Well guys, probably this is the most sexy Arcee-like robot ever, brought by a new studio Big Fire Bird Toy.
This toy features:
- Totally originally designed - Soft texture on cerain part of the body. - two head sculpts (including classic head Arcee-like head sculpt) -extremely magnificent design of body figure (more female like).
Status:
2022-3 In stock.
Parameters:
Producer
Big Fire Bird Toy
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS + Alloy / Diecast parts
Shipment
From China
Note
N/A
Dr.Wu & Mechanic Studio Extreme Warfare DW-E15 Dark Sky (Skywarp) / DW-E16 Sound Master (Blaster) Legends Class (Core Class) fit to Earthrise Titan Class 2 in 1 set 6cm / 4.6"
$29.99
Features:
Dr.Wu's new series of core class G1 figures with its size coordinated to the official Titan Class figures (Arch, Metroplex, Ark, Scorponok) and etc.
Both of the two figures are tiny (about half as tall as a coke tin) but transformable and with inpressive details.
More figures are coming in this line according to our current knowledge.
Status:
2022-4 In stock.
Parameters:
Producer
Dr.Wu Studio
Size
N/A
Material
Plastic
Shipment
From China
Note
Upgrade Kit
Dr.Wu & Mechanic Studio Extreme Warfare DW-E12 Blue Thunder (Thundercracker) / DW-E13 Sky Glider (Powerglide) Legends Class (Core Class) fit to Earthrise Titan Class 2 in 1 set 6cm / 4.6"
$29.99
Features:
Dr.Wu's new series of core class G1 figures with its size coordinated to the official Titan Class figures (Arch, Metroplex, Ark, Scorponok) and etc.
Both of the two figures are tiny (about half as tall as a coke tin) but transformable and with inpressive details.
More figures are coming in this line according to our current knowledge.
Status:
2022-4 In stock.
Parameters:
Producer
Dr.Wu Studio
Size
N/A
Material
Plastic
Shipment
From China
Note
Upgrade Kit
Flame Toys Furai Model 20 IDW Windblade Model Kit (Non-transformable) 15.5cm / 6"
$74.99
Features:
*Note: This is non-transformable building kit and you need to assemble it by yourself (it comes with pieces only.)
- Extremely poseable once complete;
- Features more than 50 moveable joints;
- Modern and Shape optimized figure in homage to the image of Windblade (female autobot) in the IDW comics;
Status:
2022-2 In stock.
Parameters:
Producer
Flame Toys
Size
Robot Form Approx. 15.5cm (6 Inches) Tall
Material
ABS
Shipment
From China
Note
Non-transformable, highly articulated figure.
Mechfanstoys MFT MF54 MF-54 Microscope (Perceptor) Mech Fans Toys 10.5 cm / 4.1"
$29.99
$34.99
14% OFF
Features:
This MF-54 Microscope is the latest legends class figure made by MechFansToys, a famous 3rd party transformer studio focusing on pocket size toys), with excellent movability and details.
It is a triple changer and transforms into a laser microscope / tank, in homage to G1 Perceptor.
Status:
2023-2 New batch in stock.
Parameters:
Producer
Magic Square (MS-Toys)
Size
Robot Form Approx. 11cm (4.3 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legendary-sized Perceptor
AlienAttack Toys AAT-01 AAT01 Mackron（Not Bayverse DOTM Megatron Oil Tank）33cm / 13"
$259.99
Features:
This AAT01 Mackron, in homage to Bayverse DOTM Megatron from the Bayverse Transformer movie is originally designed by AlienAttack Toys (a New 3rd party Studio).
This figure features:
- Robot height 32-33cm, with a weathered paint look.
- The oil tank of the disguise mode is fully built into the robot mode.
- LED light for the eyes (3 x LR521 buttons are needed)
- LED light for the truck head (2 x LR521 buttons for each head light)
- The main figure comes with a shot gun, a weathered cloak, a chain, and the igor mini figure.
Status:
2022-2 In stock.
Parameters:
Producer
N/A
Size
Robot Form Approx. 33 cm (13 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
Not Bayverse Crowbar
Mastermind Creations MMC Ocular Max OM PS-21 PS21 Medicus ( First Aid, Defensor ) All-Built-in 17cm / 6.7"
$109.99
Features:
In homage to G1 First Aid, This MMC Ocular Max OM PS-21 Medicus, transforms into an ambulance and the left arm of the mighty combiner.
This NOT Defensor might be another combiner which needs no accessories in its combination process (All accessories are built-in)
Status:
2025-3 Reissue batch in stock.
Parameters:
Producer
MasterMind Creations (MMC)
Size
Robot Form Approx. 17cm (6.7 Inches) Tall
Material
ABS
Shipment
From China
Note
MP sized, Combiner w/o accessories.
FansHobby Fans Hobby FH MB-17 MB17 Meg-Tyranno (Armada Megatron) Master Build 29.5cm
$169.99
Features:
*Note: Some robot figures in the product photos are for display only, not included in the set.
This MB-17 figure in homage to the classic image of Megatron (Armada) in the Unicron Trilogy line is brought by Fanshobby (Famous 3rd party transformer studio)
According to current information, this figure features as below:
- It transforms into a heavily armed tank.
- The disguise mode is designed with several cabins and extendable deck which allows it to interact with the robot pilot that would come together with the figure, as well as other legends class figures.
- The robot pilot itself can transform into an armed Jeep.
- The turret is rotatable, main cannon lightable and fireable (manually)
- The tank mode is equipped with real rubber tracks.
Status:
2022-2 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Mode 29.5cm
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Zeta Toys ZC-05 ZC05 Catapult (Slingshot, Superion) 10cm / 4“
$39.99
Features:
This ZC-05 Catapult , by ZETA Toys in homage to the Slingshot (member of the aerialbots), is a legend class robot figure transforming into a Jet Fighter. It can also combine with other 4 robot members of Sky Terror into the most giant combiner Kranos (in homage to G1 Superion).
The combiner is about 23cm-24cm tall, perfectly compatible with the MS-Toys Menasor / Devastator, as well as the Newage Devastator.
Status：
2022-2 In stock
Parameters:
Producer
Zeta Toys
Size
Robot Form Approx. 10cm Tall, Combiner mode 23cm-24cm tall
Material
ABS Plastic
Shipment
From China
Note
Pocket size combiner.
Zeta Toys ZC-04 ZC04 Fly Fire (Fireflight, Superion) 10cm / 4“
$39.99
Features:
This ZC-04 Fly Fire , by ZETA Toys in homage to the Fireflight (member of the aerialbots), is a legend class robot figure transforming into a Jet Fighter. It can also combine with other 4 robot members of Sky Terror into the most giant combiner Kranos (in homage to G1 Superion).
The combiner is about 23cm-24cm tall, perfectly compatible with the MS-Toys Menasor / Devastator, as well as the Newage Devastator.
Status：
2022-2 In stock
Parameters:
Producer
Zeta Toys
Size
Robot Form Approx. 10cm Tall, Combiner mode 23cm-24cm tall
Material
ABS Plastic
Shipment
From China
Note
Pocket size combiner.
Zeta Toys ZC-03 ZC03 Silver Arrow (Silverbolt, Superion) 10cm / 4“
$69.99
Features:
This ZC-03 Silver Arrow , by ZETA Toys in homage to the Silverbolt (member of the aerialbots), is a legend class robot figure transforming into a Jet Fighter. It can also combine with other 4 robot members of Sky Terror into the most giant combiner Kranos (in homage to G1 Superion).
The combiner is about 23cm-24cm tall, perfectly compatible with the MS-Toys Menasor / Devastator, as well as the Newage Devastator.
Status：
2022-2 In stock
Parameters:
Producer
Zeta Toys
Size
Robot Form Approx. 10cm Tall, Combiner mode 23cm-24cm tall
Material
ABS Plastic
Shipment
From China
Note
Pocket size combiner.
JB Jinbao Pocket Size DF06 (2.0 Version, FG01, FG02, FG03) Aircraft Battlers (Deluxe Seekers: Starscream, Skywarp, Thunderstorm, Oversized Newage Lucifer ) 12cm
$39.99
Features: *Note: We offer 2 buy options (1 in original box and the other without the box) in this product link. Pls make sure you choose the right option. This Jinbao DF06 Aircraft Battlers are oversized KO versions of Newage Seekers by New Age, in homage to G1 Starscream, Skywarp and Thunder, It is a 3 in 1 set. The new 2.0 version features: - 12cm tall fitting to all pocket size figures in the market. - Nylon applied to the hip joints, the fragile chest connectors are also improved. - The wing flap parts are added to the jet mode. - The design of the jet mode are also slightly modified. - The whole set comes with 3 x plastic stands, 3 x fire effect sets, 3 x pairs of changeable hands. Status: 2022-2 New batch in stock. Parameters: Producer Jinbao (JB) Size 12cm Material ABS Shipment From China Note KO versions...
Transformers Generations Selects Micromaster WFC-GS10 Soundwave Spy Patrol 4 in 1 set
$44.99
$54.99
18% OFF
Features:
*Note:
(1) No post-sale service can be offered for official line products.
(2) We would try to pack well, however for this set we can't guarantee perfect box. TFSAFARI wont be responsible for box defects for this set. If you order this set you would be considered to accept this proposal from us.
We have got a few sets in stock with favorable price.This set is considered as an upgrade kit.
Status:
2022-2 New batch in stock.
Parameters:
Producer
Takara Tommy
Size
Unknown
Material
ABS Plastic
Shipment
From China
Note
Not KO
NA NewAge H27EX H-27EX David (Optimus Prime) w/ Convoy Limited Metallic Version New Age 11cm / 4.3"
$94.99
$119.99
21% OFF
Features:
*Note: This is a limited version of Newage H27 David with metallic painting and a new face sculpt for H9 Agamemnon.
This NA H27 David would be a new legends class figure ( in homage to G1 Optimus Prime ), brought by NewAge ( A famous 3rd party Transformer studio focusing on pocket size toys)
This figure features:
- Baking paintings
- Transparent truck windows
- Soft latex antellas (of the head), and pipes
- Die-cast parts and Matrix of Leadership
- High articulation (3-piece hip and waist joint, separated feet and heels)
- Openable truck door under vehicle mode.
The whole set includes:
1 x David main figure
1 x Energon Axe
1 x Ion Blaster
2 x Changeable hands
1 x Convoy
1 x Roller
Status:
2022-2 New batch in stock.
Parameters:
Producer
NewAge (NA)
Size
Unknown
Material
ABS Plastic
Shipment
From China
Note
Legends class toy
JB Jinbao Pocket Size BW JB01 JB-01 Beast War Optimal Optimus (KO Iron Factory EX43 Primal Commander) 15cm / 6"
$29.99
$53.99
44% OFF
Features:
This Jinbao JB-01 Optimus Primal is a KO versions of Primal Commander by Iron Factory, in homage to Optimal Optimus, the quadruple leader in the BW. with some more weapons and small modifications (not confirmed.)
Status:
2022-1 In stock.
Parameters:
Producer
Jinbao (JB)
Size
15cm / 6“
Material
ABS
Shipment
From China
Note
KO versions of 3rd party transformers.
Iron Factory IF EX-41 EX41 Sonicwave (Soundwave) IronFactory 10cm / 4"
$33.99
$39.99
15% OFF
Features:
This EX-41 Sonicwave (in homage to Soundwave) by Iron Factory（Famous 3rd party transformers studio focusing on legends size toys) transforms into two disguise mode (tape recorder and cybertronian truck).
The figure is said to be not with any tape warriors. Two tape warriors would be released in a separate pack later.
Status:
2022-1 In stock.
Parameters:
Producer
Iron Factory (IF)
Size
Robot Form Approx. 11cm (4 Inches) Tall
Material
ABS
Shipment
From China
Note
Two disguise forms are unusual to soundwave.
Generation Toy GT GT-08E GT08E Foo Fighter Inferno (Hot Spot, Defensor, Guardian Robot) 25cm / 10“
$79.99
$159.99
50% OFF
Features:
This GT-08E Foo Fighter, another masterpiece by Generation Toy (3rd party transformer producer), transforms into an fire engine and the main body of the GT Guardian. The figure features die-cast parts, rubber tyres, and transparent windows.
Status:
2022-1 In stock.
Parameters:
Producer
Generation Toy (GT)
Size
Robot Form Approx. 25cm (10 Inches) Tall, Combiner height 38cm
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Inspired by IDW Comic
Deformation Space DS-01S DS01S Crimson Wings Purple Version (Skywarp, Seekers G1) 25cm / 10"
$144.99
Features:
*Note: This is the purple version in homage to Skywarp.
This DS01 by Deformation Space (A new 3rd party Transformers Toys Studio) would be a robot figure following the MP2.0 concept in homage to G1 Starscream. It changes into a F-16 jet fighter, while other details are still unknown yet.
Transformation Video for DS01:
Status:
2022-1 In stock.
Parameters:
Producer
Deformation Space
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size
APC Toys APC-007 APC007 Galaxy Mob ( 1:1 TFP Vehicon Deluxe Class )
$37.99
Features:
Brought by APC Toys (A new 4th / 3rd party studio), this APC007 Galaxy Mob is designed following the model of official TFP Vehicon with improved details and painting, and is a little bit oversized.
Status:
2024-3 Reissue batch in stock.
Parameters:
Producer
APC Toys
Size
13cm / 5"
Material
Plastic
Shipment
From China
Note
1:1 TFP Soundwave
FansToys FT-47 FT47 Rig (Not G1 Huffer MP) Fans Toys 16cm / 6.30"
$119.99
Features:
Another masterpiece by Fanstoys, in homage to G1 Huffer. It transforms into a yellow trailer.
Status:
2024-9 in stock.
Parameters:
Producer
Fanstoys (FT)
Size
16cm / 6.30"
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
MP size Huffer
Magic Square MS-Toys MS-B09X MS B-09X Trailblazer (Trailbreaker) Reissue 11cm / 4.3"
$44.99
$49.99
10% OFF
Features:
*Note: Currently what we have is the so-called reissue version with improved painting.
This MS-B09 Trailblazer is a legends class figure made by Magic Square (MS-Toys, a relatively new 3rd party transformer studio focusing on pocket size toys), with excellent movability and details.
It transforms into a black pickup and back, in homage to G1 Trailbreaker.
Status:
2022-1 Reissue batch in stock
Parameters:
Producer
Magic Square (MS-Toys)
Size
Robot Form Approx. 11cm (4.3 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legendary-sized Trailbreaker
Magic Square MS-Toys MS-B33 MS B-33 Deadly (Perceptor) 11 cm / 4.3"
$34.99
$54.99
36% OFF
Features:
This MS-B33 Deadly is the latest legends class figure made by Magic Square (MS-Toys, a famous 3rd party transformer studio focusing on pocket size toys), with excellent movability and details.
It transforms into a laser microscope, in homage to G1 Perceptor.
Status:
2023-10 Reissue batch in stock
Parameters:
Producer
Magic Square (MS-Toys)
Size
Robot Form Approx. 11cm (4.3 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legendary-sized Perceptor
4th Party BMB BS-03 BS03 KO UT R02 R-02 Challenger (AOE / TLK Optimus Prime) 28cm / 11"
$94.99
$119.99
21% OFF
Features:
*Note:
(1) Current stock comes with the with new metal shoulder joints which is pre-installed or as replacement which is stronger and more durable.
(2) Batteries might be removed for convenience in the shipment.
Battery Type: 5 x LR41 (For LED Eyes & Blaster)
This is the KO version of UT R02 Challenger with some modification and improvements. It is probably done by BMB. The size would be the same as the UT R02 Challenger (Optimus Prime) .
Status Update:
2024-6 Reissue batch in stock.
Parameters:
Producer
4th Party, Black Mamba
Size
Robot Form Approx. 28cm (11 Inches) Tall
Material
ABS + Diecast / Alloy parts
Shipment
From China
Note
Bayverse TLK Optimus Prime
DX9 Toys D-06 D06 Carry (Not Hot Rod Rodimus) 24cm
$94.99
Features:
This D06 Carry (Rodimus Prime) , by DX9 Toys as homage to the offical Rodimus Prime, has received even higher praise among collectors than the classic MP09 （click to buy the latest reissue here）. It boasts a unique design that combines the trailer and vehicle together in its transformation into robot form without detaching any parts.
Featuring also the metal feet and rubber tyre, as well as a sniper rifle which can transforme into a legendary robot, this is one of the best Rodimus Prime ever.
Status:
2025-11 Reissue batch in stock.
Parameters:
Producer
DX9 Toys
Size
Robot Form Approx. 24cm (9.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Intergrated Transformation
Moon Studio MS-02 Ice Land, Radiatron (Not G1 Yukikaze, Raiden ) 21cm / 8.3"
$124.99
Features:
This MS-02 Ice Land, by Moon Studio in homage to the G1 Yukikaze is the 2nd member of the mighty combiner Radiatron (in homage to G1 Raiden, the combiner of the train bots.) It transforms into a high-speed train and one feet of the the combiner.
Status:
2022-1 1st batch in stock.
Parameters:
Producer
Moon Studio (Possible avatar of Zeta Toys )
Size
Height of Robot 21cm / 8.3", Height of the combiner around 55cm
Material
ABS Plastic
Shipment
From China
Note
Combiner member
Moon Studio MS-01 Dark Night, Radiatron (Not G1 Getsuei, Raiden ) 21cm / 8.3"
$124.99
Features:
This MS-01 Dark Night, by Moon Studio in homage to the G1 Getsuai is the first member of the mighty combiner Radiatron (in homage to G1 Raiden, the combiner of the train bots.) It transforms into a high-speed train and one feet of the the combiner.
Status:
2022-2 In stock.
Parameters:
Producer
Moon Studio (Possible avatar of Zeta Toys )
Size
Height of Robot 21cm / 8.3", Height of the combiner around 55cm
Material
ABS Plastic
Shipment
From China
Note
Combiner member
Dr.Wu & Mechanic Studio Extreme Warfare DW-E04 DWE04 Prime Commander (Optimus Prime) w/ convoy Legends Class (Toy Color Version) 6cm / 4.6"
$32.99
Features:
*Note: This is the latest toy color version with a blue roller as an extra accesory.
Dr.Wu's new series of core class G1 figures with its size coordinated to the official Titan Class figures (Scorponok) and etc.
This prime commander can transform into a small truck head and it also comes with a convoy wich can be opened in 2 different ways (in accordance with G1 animations)
More figures are coming in this line according to our current knowledge.
Status:
2023-2 Reissue batch In stock.
Parameters:
Producer
Dr.Wu Studio
Size
6cm
Material
Plastic
Shipment
From China
Note
Upgrade Kit
Robot Paradise RP-01B RP01B Ravage, Laserbeak & Rumble Cassette Warriors 3 in 1
$99.99
$109.99
9% OFF
Features:
MP size cassette warriors (Ravage, Laserbeak & Rumble) 3 in 1 set fit to the MP size RP-01 Acoustic wave (in homage to G1 classic soundwave).
You can buy the RP-01 set in the below link:
Robot Paradise RP-01 Acoustic Wave (G1 Soundwave)
Status:
2022-1 In stock.
Parameters:
Producer
Robot Paradise ( Probably avatar of Fanstoys (FT))
Size
Fit to RP01
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
MP size Soundwave
XTransbots MX-27 MX-XXVII MX27 Janssen ( Perceptor ) X-transbots
$99.99
$134.99
26% OFF
Features:
This MX-27 Janssen by Xtransbots (A famous 3rd party transformer studio) would be a new robot figure with its size perfectly matching official MP series (in homage to G1 Perceptor ). It transforms into a microscope.
The whole set may includes:
- 1 x Main figure;
- 5 x Changeable faces;
- 1 x New comic headsculpt;
- 3 x Mini robot figures;
- 1 x Mini telescope figure;
- 1 x Rifle
- 1 x laser pistol
- 1 x Missle launcher
- 1 x Beaker
- 1 x Test tube
- 1 x Fire effect part
Status
2022-1 New batch in stock.
Parameters:
Producer
Xtransbots
Size
Unknown
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
FansHobby Fans Hobby FH MB-14 MB14 Kap (MP Hosehead) Master Build
$74.99
$84.99
12% OFF
Features:
This MB-14 Kap, in homage to the classic image of Hosehead is brought by Fanshobby (Famous 3rd party transformer studio)
This set is of vivid painting fitting, and in accordance with the size of official MP line. It transforms into a red fire engine. It also comes with a robot pilot which can fit in to the cabin as the driver.
Status:
2024-12 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Form Approx. 17cm (6 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
NA NewAge H16G H-16G Fenrir (G2 Ramjet ) SGC Limited Version New Age 9cm / 3.5"
$79.99
Features:
*Note: This is 13th SGC limited version with very limited qty.
This new H16G Fenrir ( Inspired by G2 Ramjet, ), brought by NewAge ( A new 3rd party Transformer studio focusing on pocket size toys) is of legends scale and transforms into 3 jet fighters of different styles.
This figure follows the classic images in G1 cartoon, with amazingly high articulation, vivid head sculpts and baking-like finishing on some parts. The different styles of wings (in G1 cartoon) has also been completely displayed in the design of this set, which is unprecedented among all the legends-class likewise figures in the market.
Its size is compatible with other NewAge legends class figure.
Status:
2021-12 In stock.
Parameters:
Producer
NewAge (NA)
Size
Robot Form Approx. 9cm (3.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legends class toy
NA NewAge H41 H-41 Jones (Beach Comber) New Age 10cm / 4"
$39.99
$44.99
11% OFF
Features:
This NA H41 Jones would be a new legends class figure ( in homage to G1 Beach Comber), brought by NewAge ( A famous 3rd party Transformer studio focusing on pocket size toys)
This figure features:
- Baking paintings
- Die-cast feet
The whole set includes:
1 x Main figure
1 x Laser gun
Status:
2021-12 In stock.
Parameters:
Producer
NewAge (NA)
Size
Unknown
Material
ABS Plastic
Shipment
From China
Note
Legends class toy
Iron Factory IF EX-45K EX45K Iron Samurai Kage Shishimaru (Lio Convoy / Leo Prime) Nemesis Version 10cm / 4"
$44.99
Features:
*Note：This would be the black Nemesis version of IF-EX45 Shishimaru. It transforms into a black tiger with evil wings.
This EX-45 Shishimaru (in homage to Lio Convoy) by Iron Factory（Famous 3rd party transformers studio focusing on legends size toys) would be the first figure of its brand-new Iron samurai series. The figure would be equipped with katanas, and transforms into a white tiger.
Status:
2021-12 In stock
Parameters:
Producer
Iron Factory (IF)
Size
Robot Form Approx. 10cm (4 Inches) Tall
Material
ABS
Shipment
From China
Note
Iron Samurai
Iron Factory IF EX-39D EX39D Dustfog ( Exhaust) SGC Convention Exclusive IronFactory 9cm / 3.5"
$44.99
Features:
IF EX-39D Dustfog is a legendary-sized figure in homage to Exhaust by Iron Factory （Famous 3rd party transformers studio focusing on legends size toys）It transforms into classic race car.
The robot is small but with no simplification in its painting, movability and fun in the process of transformation.
This is an SGC Convention exclusive version with very limited qty.
Status:
2021-12 In stock
Parameters:
Producer
Iron Factory (IF)
Size
Robot Form Approx. 9cm (3.5 Inches) Tall
Material
ABS
Shipment
From China
Note
Legendary sized presentation of IDW Dustfog
JB Jinbao Pocket Size DF08 DF-08 8871B Freeze Devil (Transmetal Megatron Blue Version ) 15cm / 6"
$39.99
Features:
This Jinbao DF08 Flame Devil is an minimized KO versions of Blue Dragon by Perfect Effect, in homage to Transmetal 2 Megatron. with some more weapons and small modifications (not confirmed.)
Status:
2022-7 New batch in stock.
Parameters:
Producer
Jinbao (JB)
Size
15cm / 6“
Material
ABS
Shipment
From China
Note
KO versions of 3rd party transformers.
Cyber Era CE01 CE-01 Beetle (Bumblebee Movie Bumblebee, Oversized OS Transcraft TC02) Reissue 20cm / 8.1"
$74.99
$89.99
17% OFF
Features:
This is an oversized version of the below figure (in homage to the image of Bumblebee Move Bumblebee).
Transcraft TC02 Beetle (Bumblebee movie Bomblebee)
This new version features:
- 2 x headsculpts with LED eye lights
- 2 x arm blades
- 1 x war hammer
Status:
2025-Sep: Reissued New batch in stock.
Parameters:
Producer
Cyber Era
Size
Robot Form Approx. 17cm (6.7 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
N/A
Deformation Space DS-01R DS01R Crimson Wings Blue Version (Thundercracker, Starscream G1) 25cm / 10"
$144.99
Features:
*Note: This is the blue version in homage to Thundercracker.
This DS01 by Deformation Space (A new 3rd party Transformers Toys Studio) would be a robot figure following the MP2.0 concept in homage to G1 Starscream. It changes into a F-16 jet fighter, while other details are still unknown yet.
Transformation Video for DS01:
Status:
2021-12 In stock.
Parameters:
Producer
Deformation Space
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size
Magic Square MS Toys Constructor Devastator Combiner 3 sets (2 in 1 set) 25cm / 9.85"
$259.99
Features: *Note: This link is for pre-order of all 3 sets of the combiner (which might be released separately). The MS Toys Constructor or Devastator Combiner (Formal name not confirmed yet) include 3 x 2 in 1 sets as below, in homage to G1 Devastator. MS-B37 Shovel Master & MS-B38 Roller Master MS-B41 Excavator & MS -B42 Bulldozer MS -B30 Hook & MS -B40 Long Haul Each set is said to include certain parts of the accessories needed for the final combination, and you get all the 3 sets you get all you need for the final combiner (no need to buy more accessories). All the accessories combines into the main body of the combiner (see photo) as well as a double-driller in the team mode. Status: 2021-12 In stock. Parameters: Producer Magic Square (MS-Toys) Size Combiner form 25cm / 9.85" Material ABS Plastic Shipment From China Note Legendary-sized Constructor ...
Magic Square MS Toys MS-B39 Hook & MS-B40 Long Haul Constructor Devastator Combiner Set B (2 in 1 set)10cm / 4"
$79.99
$89.99
11% OFF
Features: *Note: This link is for Set C (2 in 1 set of MS-B39 Hook and MS-B40 Long Haul, as well as the last part of the accessories needed for the combiner). The MS Toys Constructor or Devastator Combiner (Formal name not confirmed yet) include 3 x 2 in 1 sets as below, in homage to G1 Devastator MS-B37 Shovel Master & MS-B38 Roller Master MS-B41 Excavator & MS -B42 Bulldozer MS -B30 Hook & MS -B40 Long Haul Each set is said to include certain parts of the accessories needed for the final combination, and you get all the 3 sets you get all you need for the final combiner (no need to buy more accessories). All the accessories combines into the main body of the combiner (see photo) as well as a double-driller in the team mode. Status: 2021-12 In stock. Parameters: Producer Magic Square (MS-Toys) Size Combiner form 25cm...
Titan Power TP-01 TP01 Titan Beast King (Voltron) Non-Transformable Metallic Version 30cm / 12"
$149.99
Features:
Titan Beast King Metallic Version features:
- Non-transformable / Disassemblable
- Brand-new mettalic finishing
- Various weapons
- The lights are all CANCELLED for this version (mainly eyelights for the eyes.)
Status:
2021-12 A few sets in stock.
Parameters:
Producer
Titan Power
Size
30cm tall
Material
ABS Plastic + Die cast part
Shipment
From China
Note
Non-transformable Voltron
TFC Toys STC-02 STC02 Tyrant (Dominant Megatron) 24cm / 9.5"
$199.99
$239.99
17% OFF
Features:
STC-02 Tyrant is designed following the classic image of Dominant Megatron by TFC TOYS. It is a triple changer which can transform from heavily armed robot into a tank (with 2 battle modes) and a helicopter.
This figure features disassemblable armors, 3 different faces and more than 6 different modes (a lot more).
Status
2021-12 New batch in stock.
Parameters:
Producer
TFC TOYS
Size
Armored Robot Form Approx. 29cm (11.5 Inches) Tall, Unarmored figure approx. 24cm (9.5 Inches) Tall.
Material
PVC, Diecast / Alloy Part
Shipment
From China
Note
Dominant Megatron
AOYI Mech LS-13Z LS13Z Tactical Commander (Oversized SS38 Optimus Prime, Shattered Glass Version) 30cm / 12"
$74.99
$94.99
21% OFF
Features:
*Note: A Shattered Glass (Purple) Version of LS13 Tactical Commander
A new oversized OP figure in homage to the official SS38 Optimus Prime (from the Bumblebee Movie)is brought by a new 3rd / 4th party transformer studio AOYI mech (should be the sub-brand of Black Mamba BMB) .
This new OP with enhanced details and much bigger size is also equipped with LED lights in its head / eyes of robot, and high quality rubber tyre. The original mould of SS38 has also been modified.
Status:
2020-12 A few sets in stock on sale.
Parameters:
Producer
AOYI Mech, Sub-brand of Black Mamba (BMB)
Size
Robot Form Approx. 30cm (12 Inches) Tall
Material
ABS Plastic + Alloy
Shipment
From China
Note
Oversized version of Official SS38 Optimus Prime
NA NewAge H27 H-27 David (Optimus Prime) w/ Convoy New Age 11cm / 4.3"
$79.99
Features:
*Note: The reissue batch comes with an extra headsculpt and the arm structure has been modified.
This NA H27 David would be a new legends class figure ( in homage to G1 Optimus Prime ), brought by NewAge ( A famous 3rd party Transformer studio focusing on pocket size toys)
This figure features:
- Baking paintings
- Transparent truck windows
- Soft latex antellas (of the head), and pipes
- Die-cast parts and Matrix of Leadership
- High articulation (3-piece hip and waist joint, separated feet and heels)
- Openable truck door under vehicle mode.
The whole set includes:
1 x David main figure
1 x Energon Axe
1 x Ion Blaster
2 x Changeable hands
1 x Convoy
1 x Roller
Status:
2023-12 Reissue version in stock.
Parameters:
Producer
NewAge (NA)
Size
Unknown
Material
ABS Plastic
Shipment
From China
Note
Legends class toy
NA NewAge H24 H-24 Macchio（Megatron Shattered Glass Version) New Age 11cm / 4"
$64.99
Features:
This H24 Macchio , brought by NewAge ( A new 3rd party Transformer studio focusing on pocket size toys) is of pocket size and transforms into a powerful Cybertronian Spaceship. It is made in homage to Megatron (Shattered Glass Version) in IDW comics, and is modified from H23 Darius.
Still the figures would be small but delicate and of high articulation, while die-cast part would be added to the chest and knees. The whole set includes:
- 1 x main figure + weapons.
- 2 x faces ; 4 x changeable hands
Status:
2021-12 A few sets In stock
Parameters:
Producer
NewAge (NA)
Size
Robot Form Approx. 8cm (3 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legends class toy
NA NewAge H27P H-27P Slaughter (Shattered Glass Optimus Prime) New Age 11cm / 4.3"
$59.99
$64.99
8% OFF
Features:
Note: This is the shattered glass version of Newage H27, comparing to H27, it DOESN'T INCLUDE the convoy but comes with 1 x Prime Sword and several other weapon parts.
This NA H27 David would be a new legends class figure ( in homage to G1 Optimus Prime ), brought by NewAge ( A famous 3rd party Transformer studio focusing on pocket size toys)
This figure features:
- Baking paintings
- Transparent truck windows
- Soft latex antellas (of the head), and pipes
- Die-cast parts and Matrix of Leadership
- High articulation (3-piece hip and waist joint, separated feet and heels)
- Openable truck door under vehicle mode.
Status:
2021-12 In stock.
Parameters:
Producer
NewAge (NA)
Size
11cm /4'3"
Material
ABS Plastic
Shipment
From China
Note
Legends class toy
NA NewAge H25 H-25 H26 H-26 Herbie and Vanishing Point (Bumblebee 2.0 and Cliffjumper) 2 in 1 pack New Age 5.5cm / 2"
$55.99
Features:
This new Herbie and Vanishing Point ( in homage to G1 Bumblebee and Cliffjumper), brought by NewAge ( A new 3rd party Transformer studio focusing on pocket size toys) include the 2.0 version Bumblebee with several updated features as below:
- Feet can be totally grounded in different angles.
- Rotatable elbows and fists.
- Extremely high articulation.
- Rotatable and bendable waist joint.
Status:
2025-11 Reissue batch in stock.
3mins Swift Transform Video by Touch Toys:
Parameters:
Producer
NewAge (NA)
Size
Robot Form Approx. 5.5cm (2 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legends class toy