Magic Square MS-Toys MS-01X+ MS01X+ Light of Freedom ( Optimus Prime) MP Size Metallic Version Reissue 24cm
Sold Out
Features: *Note: This is the MS-01X+ version with metallic finishing. According to MS Toys, there would be no more spare parts available for this figure. This MS-01 Optimus Prime is the metallic version of MS-01 by Magic Square (MS-Toys, a relatively new 3rd party transformer studio focusing on pocket size toys) in MP Size transformers, with features as follows: - Matt finish paint is applied to the whole body, with texture very close to the coming official MP-44 Optimus Prime. - Different electroplated parts, transparent parts are used to enhance the details. - The Matrix of Leadership is made of diecast. - The whole figure with its unique texture gives an advanced presentation of the classic G1 optimus prime, quite different from other G1 MP-sized OPs issued before. - See the difference between MS-01X Metallic Version on the right and the MS-01 Original version on the left. Status 2022-2 Reissued batch in...
Eagle EG01J EG-01J Not MP52+ MP-52+ (Upgraded Version Thundercracker) 25cm / 10"
Sold Out
Features: Note: 1. Currently there's no spare parts available for this figure. 2. This is is a 1:1 KO version of MP52+ (in homage to MP2.0 Thundercracker) with some improvement. The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China: Pros: - No simplification in structure and transformation. 1:1 full version KO. - Some easily crackable parts of the original figure are changed to nylon ones - All accessories (replacement parts, special effect parts, stand platforms.) are included. - Painting are similar to the original figure Cons - Still some seams can be found and hard to adjust on the plane mode; - Details on the head sculpts are not as good as the original one. - Some joints are too tight to transform. Status: 2022-2 New batch in stock. Parameters: Producer Eagle Size Robot Form Approx. 25cm (10 Inches) Tall Material ABS Plastic +...
Eagle EG01 EG-01 Not MP52 MP-52 (Upgraded Version Starscream) 25cm / 10"
Sold Out
Features:
Note: No Post-sale service (spare part) is available for this figure.
The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China:
Pros:
- No simplification in structure and transformation. 1:1 full version KO.
- Some easily crackable parts of the original figure are changed to nylon ones
- All accessories (replacement parts, special effect parts, stand platforms.) are included.
- Painting are similar to the original figure
Cons
- Still some seams can be found and hard to adjust on the plane mode;
- Details on the head sculpts are not as good as the original one.
- Some joints are too tight to transform.
Status:
2022-2 New batch in stock.
Parameters:
Producer
Eagle
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO Version
Transcraft TC TC-02R T02R Red Jump (Bumblebee Movie Cliffjumper) 17cm / 6.7"
Sold Out
Features:
*Note: This is the red painting version (Cliffjumper version) of TC02 with a new headsculpt and a bit of revision on the model.
TransCraft is a brand-new studio, here comes the new TC02 Beettle (in homage to the bumblebee in bumblebee movie) after their successs in MXG-01. The robot is with matte-painting (similar to the painting in the movie) and it transforms into a vintage Volksvagen Bumblebee.
This set is considered in a lot of the reviews as the best Bumblebee movie bumblebee toy figure ever with its creative design in its transformation and body structure.
Status:
2022-3 New batch in stock.
Parameters:
Producer
TransCraft (TC)
Size
Robot Form Approx. 17cm (6.7 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
N/A
APC Toys APC-004BF APC004BF Bossy Flame ( 1:1 TFP Galvatron Voyage Class ) 20cm / 8"
$39.99
$52.99
Features:
*Note: APC-004BF Bossy Flame is a repainted version of APC004 Dark Master with a brand new headsculpt.
Brought by APC Toys (A new 4th / 3rd party studio), this Dark Master is made after the model of official TFP Optimus Prime, with new painting and more weapons, as well as some modification on the original models as below:
- Now the feet of the Dark master can be fully grounded
- The chest and head sculpt of the figure have been modified to fit better to the image of Megatron in the TFC animations.
- All joints have been upgraded
- Matte silver painting.
Status:
2022-3 In stock
Parameters:
Producer
APC Toys
Size
20cm / 8"
Material
Plastic
Shipment
From China
Note
1:1 TFP Megatron (Voyage Class)
No Brand NB 4th Party KO MP49 MP-49 Black Convoy (Nemesis Prime) Neutral Packing Version 25cm / 10"
Sold Out
Features: This is is a 4th party KO version of MP49 Black Convoy (Black OP 3.0) No formal packing for this set. It is probably manufactured by BMB so good post-sales service can't be expected. The below are pros and cons of this KO set based on the feedback from our domestic customers in China: Only some accessories are included. Convoy is not included. Pros: - No simplification in structure and transformation. 1:1 full version KO. - No major or common defects are found in bulk. - Joints on knees and ankles are enhanced. - Light effect added to the jet pack. Cons - Plastic material used are not as good as the official version. - Still the hip joints are loose on some sets (same to official version) - On some figures, Some parts don't fit precisely,seams can be found on robot mode. (like inner parts of the...
Iron Factory IF EX-55 EX55 Surfing Arrow(Seaspray)10cm / 4"
$37.99
$39.99
Features:
This EX-55 Surfing Arrow (in homage to IDW Seaspray) by Iron Factory(Famous 3rd party transformers studio focusing on legends size toys) is a transformable robot figure which can transform into an armed hovermarine.
Status:
2022-3 In stock.
Parameters:
Producer
Iron Factory (IF)
Size
Robot form 10cm / 4"
Material
ABS
Shipment
From China
Note
IDW
Big Fire Bird Toy EX-01 Plus EX01Plus EX01P Mooka Mocha (Arcee) 19cm / 7.5"
Sold Out
Features:
*Note: This would be a repainted black version for EX01 Nicee with new painting as well as newly added weapons, extra headsculpts as well as other accessories.
Well guys, probably this is the most sexy Arcee-like robot ever, brought by a new studio Big Fire Bird Toy.
This toy features:
- Totally originally designed - Soft texture on cerain part of the body. - two head sculpts (including classic head Arcee-like head sculpt) -extremely magnificent design of body figure (more female like).
Status:
2022-3 In stock.
Parameters:
Producer
Big Fire Bird Toy
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS + Alloy / Diecast parts
Shipment
From China
Note
N/A
Matrix Workshop M69 M-69 Weapon set for Studio Series 81 Brawn (in Bumblebee Movie) Upgrade Kit
Sold Out
Features:
Now you have a new weapon set for your Studio Series Brawn by Matrix Workshop.
Whole set includes:
1 x Laser handgun1 x Hand Cannon1 x Hand drill1 x Shield
The sheild can be a carrier for all the weapons and can be installed on the back of Brawn.
See all information in the product photos.
Note:1. The product come in painted (same as what you seen from the photos)2. The robot figure is not includes in the weapon set.
Status:
2022-3 In stock.
Parameters:
Producer
Matrix Workshop
Size
Fit to SS Brawn
Material
PLA
Shipment
From China
Note
Upgrade Kit
Dr.Wu & Mechanic Studio Extreme Warfare DW-E15 Dark Sky (Skywarp) / DW-E16 Sound Master (Blaster) Legends Class (Core Class) fit to Earthrise Titan Class 2 in 1 set 6cm / 4.6"
Sold Out
Features:
Dr.Wu's new series of core class G1 figures with its size coordinated to the official Titan Class figures (Arch, Metroplex, Ark, Scorponok) and etc.
Both of the two figures are tiny (about half as tall as a coke tin) but transformable and with inpressive details.
More figures are coming in this line according to our current knowledge.
Status:
2022-4 In stock.
Parameters:
Producer
Dr.Wu Studio
Size
N/A
Material
Plastic
Shipment
From China
Note
Upgrade Kit
Dr.Wu & Mechanic Studio Extreme Warfare DW-E12 Blue Thunder (Thundercracker) / DW-E13 Sky Glider (Powerglide) Legends Class (Core Class) fit to Earthrise Titan Class 2 in 1 set 6cm / 4.6"
Sold Out
Features:
Dr.Wu's new series of core class G1 figures with its size coordinated to the official Titan Class figures (Arch, Metroplex, Ark, Scorponok) and etc.
Both of the two figures are tiny (about half as tall as a coke tin) but transformable and with inpressive details.
More figures are coming in this line according to our current knowledge.
Status:
2022-4 In stock.
Parameters:
Producer
Dr.Wu Studio
Size
N/A
Material
Plastic
Shipment
From China
Note
Upgrade Kit
Dr.Wu & Mechanic Studio Extreme Warfare DW-E09 Spray Drift (Seaspray) / DW-E10 Star Fear (Starscream) Legends Class (Core Class) fit to Earthrise Titan Class 2 in 1 set 6cm / 4.6"
Sold Out
Features:
Dr.Wu's new series of core class G1 figures with its size coordinated to the official Titan Class figures (Arch, Metroplex, Ark, Scorponok) and etc.
Both of the two figures are tiny (about half as tall as a coke tin) but transformable and with inpressive details.
More figures are coming in this line according to our current knowledge.
Status:
2022-4 In stock.
Parameters:
Producer
Dr.Wu Studio
Size
N/A
Material
Plastic
Shipment
From China
Note
Upgrade Kit
Flame Toys Furai Model 20 IDW Windblade Model Kit (Non-transformable) 15.5cm / 6"
Sold Out
Features:
*Note: This is non-transformable building kit and you need to assemble it by yourself (it comes with pieces only.)
- Extremely poseable once complete;
- Features more than 50 moveable joints;
- Modern and Shape optimized figure in homage to the image of Windblade (female autobot) in the IDW comics;
Status:
2022-2 In stock.
Parameters:
Producer
Flame Toys
Size
Robot Form Approx. 15.5cm (6 Inches) Tall
Material
ABS
Shipment
From China
Note
Non-transformable, highly articulated figure.
Mechfanstoys MFT MF54 MF-54 Microscope (Perceptor) Mech Fans Toys 10.5 cm / 4.1"
$29.99
$34.99
Features:
This MF-54 Microscope is the latest legends class figure made by MechFansToys, a famous 3rd party transformer studio focusing on pocket size toys), with excellent movability and details.
It is a triple changer and transforms into a laser microscope / tank, in homage to G1 Perceptor.
Status:
2022-2 New batch in stock.
Parameters:
Producer
Magic Square (MS-Toys)
Size
Robot Form Approx. 11cm (4.3 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legendary-sized Perceptor
AlienAttack Toys AAT-01 AAT01 Mackron(Not Bayverse DOTM Megatron Oil Tank)33cm / 13"
Sold Out
Features:
This AAT01 Mackron, in homage to Bayverse DOTM Megatron from the Bayverse Transformer movie is originally designed by AlienAttack Toys (a New 3rd party Studio).
This figure features:
- Robot height 32-33cm, with a weathered paint look.
- The oil tank of the disguise mode is fully built into the robot mode.
- LED light for the eyes (3 x LR521 buttons are needed)
- LED light for the truck head (2 x LR521 buttons for each head light)
- The main figure comes with a shot gun, a weathered cloak, a chain, and the igor mini figure.
Status:
2022-2 In stock.
Parameters:
Producer
N/A
Size
Robot Form Approx. 33 cm (13 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
Not Bayverse Crowbar
Mastermind Creations MMC Ocular Max OM PS-21 PS21 Medicus ( First Aid, Defensor ) All-Built-in 17cm / 6.7"
Sold Out
Features:
In homage to G1 First Aid, This MMC Ocular Max OM PS-21 Medicus, transforms into an ambulance and the left arm of the mighty combiner.
This NOT Defensor might be another combiner which needs no accessories in its combination process (All accessories are built-in)
Status:
2022-2 In stock (first batch).
Parameters:
Producer
MasterMind Creations (MMC)
Size
Robot Form Approx. 17cm (6.7 Inches) Tall
Material
ABS
Shipment
From China
Note
MP sized, Combiner w/o accessories.
FansHobby FH MB-17 MB17 Meg-Tyranno (Armada Megatron) Master Build 29.5cm
Sold Out
Features:
*Note: Some robot figures in the product photos are for display only, not included in the set.
This MB-17 figure in homage to the classic image of Megatron (Armada) in the Unicron Trilogy line is brought by Fanshobby (Famous 3rd party transformer studio)
According to current information, this figure features as below:
- It transforms into a heavily armed tank.
- The disguise mode is designed with several cabins and extendable deck which allows it to interact with the robot pilot that would come together with the figure, as well as other legends class figures.
- The robot pilot itself can transform into an armed Jeep.
- The turret is rotatable, main cannon lightable and fireable (manually)
- The tank mode is equipped with real rubber tracks.
Status:
2022-2 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Mode 29.5cm
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Zeta Toys ZC-05 ZC05 Catapult (Slingshot, Superion) 10cm / 4“
Sold Out
Features:
This ZC-05 Catapult , by ZETA Toys in homage to the Slingshot (member of the aerialbots), is a legend class robot figure transforming into a Jet Fighter. It can also combine with other 4 robot members of Sky Terror into the most giant combiner Kranos (in homage to G1 Superion).
The combiner is about 23cm-24cm tall, perfectly compatible with the MS-Toys Menasor / Devastator, as well as the Newage Devastator.
Status:
2022-2 In stock
Parameters:
Producer
Zeta Toys
Size
Robot Form Approx. 10cm Tall, Combiner mode 23cm-24cm tall
Material
ABS Plastic
Shipment
From China
Note
Pocket size combiner.
Zeta Toys ZC-04 ZC04 Fly Fire (Fireflight, Superion) 10cm / 4“
Sold Out
Features:
This ZC-04 Fly Fire , by ZETA Toys in homage to the Fireflight (member of the aerialbots), is a legend class robot figure transforming into a Jet Fighter. It can also combine with other 4 robot members of Sky Terror into the most giant combiner Kranos (in homage to G1 Superion).
The combiner is about 23cm-24cm tall, perfectly compatible with the MS-Toys Menasor / Devastator, as well as the Newage Devastator.
Status:
2022-2 In stock
Parameters:
Producer
Zeta Toys
Size
Robot Form Approx. 10cm Tall, Combiner mode 23cm-24cm tall
Material
ABS Plastic
Shipment
From China
Note
Pocket size combiner.
Zeta Toys ZC-03 ZC03 Silver Arrow (Silverbolt, Superion) 10cm / 4“
Sold Out
Features:
This ZC-03 Silver Arrow , by ZETA Toys in homage to the Silverbolt (member of the aerialbots), is a legend class robot figure transforming into a Jet Fighter. It can also combine with other 4 robot members of Sky Terror into the most giant combiner Kranos (in homage to G1 Superion).
The combiner is about 23cm-24cm tall, perfectly compatible with the MS-Toys Menasor / Devastator, as well as the Newage Devastator.
Status:
2022-2 In stock
Parameters:
Producer
Zeta Toys
Size
Robot Form Approx. 10cm Tall, Combiner mode 23cm-24cm tall
Material
ABS Plastic
Shipment
From China
Note
Pocket size combiner.